Indeed, many are tormented from the fact that some of the walls of the dwelling is not perfectly smooth. For the same reason, problems may arise related not only with aesthetic considerations. It is also important to understand that leveling the walls of the plaster is not the best idea. It takes a lot of time and money, and the end result very rarely meets the requirements. It is the alignment of the walls by plasterboard will be the best option that will be not very expensive, and the final result will also be pleasantly surprised.

It is important to know that there are two ways to attach plasterboard sheets to the wall:

• fastening with a metal frame;
• gifts of plasterboard directly to the wall.

Obviously, the most reliable and popular method is a fastening based on a massive metal frame. However, this method is not suitable for many owners. It is important to understand that the frame itself has a thickness of at least 4 cm. Within a small room, it is too much, so it is very often applied to the gluing of the material to the surface.

The main features of the frame fastening of the material

Before making a choice in favor of glitzer plasterboard to the wall, it is necessary to have some information about another method of fastening the material. Immediately, it should be understood that all this process is quite long and difficult, so they often do precisely professionals.

Preparation of walls to the fastening of the material

To create even the minimum layer for aligning the wall, it is necessary to process the surface. It is best to lose the old layers of plaster or wallpaper. All this takes an excess area that can be beneficial. This is especially true of small apartments, where each centimeter has a tremendous value. It is advisable to apply primer on the wall. Sometimes this action is not mandatory, but in such conditions the coating will last a little longer. Also experts advise to process the surface of the wall by an antiseptic. All because after arranging the wall surface, we have access to inside.

The process of creating a carcass

The frame itself is quite simple to equip. It is important that in the end the design turned out to be the most stable and really strong so that even significant blows on it could not disrupt the overall integrity. First, the UD profile is mounted throughout the perimeter, which will become the basis for fastening the plasterboard sheets. The profile itself is attached with the help of a dowel directly to the concrete wall. The edges of the profile should go out. Based on them will be fixed jumpers

Next, the installation of CD profiles, already on which, in turn, are attached plasterboard sheets. It is important to do everything so that all elements of profiles are on the same level, otherwise a certain curvature of the surface cannot be avoided. The first elements of profiles should be installed on the wall itself, and the subsequent - with an interval of 60 cm. Often, special suspensions are used in this process, which give the overall structures of stiffness and stability. However, it is only in the case of creating a massive object.

Installation of sheets of plasterboard

Fastening sheets to design is the most pleasant and extremely simple process. For him, we will need a screw of 35 mm. The heads of the self-tapping screws themselves should be touched into the inside so that they do not stand out on the future smooth surface. If certain sheets of the material are slightly larger than the required dimensions, a special knife cutter should be applied for drywall.

Finish and end process

It is the finish that is the most important process. Virtually everything depends on the final quality and evenness of the surface. In the seams, the reinforcing grid is attached, which will help to hide some flaws of the surface. Nowadays, other materials that are able to provide additional surface protection are also often used. Already after applying putty, surface grinding should be carried out. It is important not to overdo it here. The putty layer itself should be no more than 2 mm, otherwise cracks may occur, and sometimes the material can be sprinkled.

Features of gluable drywall

And indeed, align the walls with plasterboard without a frame much easier than with a classic way. As already mentioned, the arrangement of the walls of plasterboard without a frame is significantly saved by space in the room, and this is a huge plus.

Basic operations when arranging the wall

1. To begin, it should be carefully done over the smoothness of the surface, which we will be separated by plasterboard. Unlike a frame type of alignment of walls, it depends a lot here precisely from the wall itself.
2. It is very important to handle the pre-wall of the primer. This will improve the quality of the enclosure properties of the material.
3. Before arranging the surface, it is necessary to take care of the size of the sheets of plasterboard. It is best to pre-cut the required amount to optimal sizes.
4. On the entire surface, where the arrangement of plasterboard will occur, the holes under the dowel should be drilled. The number of holes can be different, it all depends on the area of \u200b\u200bthe wall. Screws will be screwed in such a way that all the hats are located at one level.
5. The decoration of the walls of plasterboard without a frame is not much different from the classical method. After the arrangement of plasterboard sheets, we need to apply putty.

Basics of plasterboard mounting to the surface

The mounting of plasterboard occurs the back of the sheets. It is on this surface and glue is applied. It is important to know that it is necessary to apply glue with pieces in a step of 30 cm. Often, experts advise to apply glue directly on the wall. Sometimes it simplifies the process. After applying glue, the sheets are pressed close to dowels. Very often in this process, a rubber hammer is used, which contributes to the creation of a smooth surface.

It is often that the wall is rather curve. To avoid trouble with the walls of the walls with plasterboard without a frame, it is worth it to finish the surface of the wall with small stripes, which will ensure the maximum surface evenness after the final manipulation.

There are also alternative methods for the arrangement of the wall with plasterboard, but they are somewhat complex, and in some moments they do not guarantee high quality.

Price issue and other features of the surface arrangement of drywall

Thanks to modern technologies, any method of arranging the wall with plasterboard will lead to success. Surely, many believe that the frame provides a higher reliability of the design in contrast to the gluing of drywall. In fact, everything is not so definitely. If you finish with plasterboard without a frame as carefully, without releasing a single part, then we ultimately get a chic result. Creating a frame very often turns out to be a difficult task, so many errors and other unpleasant moments may occur in such a situation. Very often it is the framework that is used to create some unusual elements of the interior and room, while the gypsum glitter is perfect for aligning the surface.

If we talk about pricing politics, it very often all depends on suppliers of materials and other serious factors. In itself, the arrangement of the wall with the help of the creation of the frame will cost much more expensive. However, it is worth understanding that glue, designed to glue the drywall with the surface of the wall, also costs himself. In addition, its quantity should be really large. Also, much depends on what area of \u200b\u200bthe wall must be separated by plasterboard. By itself, the material is inexpensive, but auxiliary tools and some details can do without hasty. If we are talking about a whole apartment, then it is better to turn to wholesale points of sales, where it will be good to save.