Skill for shoes with your own hands

Get rid of the clutter in the hallway of the shoe will help bedside for shoes. Of course, you can buy a locker in the shop, but there you sell consumer goods of dubious quality at an inflated price. An exclusive piece of furniture, which will immediately rush into the eyes of the guests is absolutely not difficult to do by hand.

Decide to start with materials. Good tables are derived from wooden boards, laminated chipboard or MDF plates decorated façade. For good tables in the hall need a solid foundation, finished to your taste in harmony with the interior materials. Choose a suitable variant tables for shoes can be of many photos on the Internet.

For the manufacture of cabinets for shoes with his hands need a small set of tools, furniture accessories and materials. Depending on the free space in the hallway, you can choose vertical or horizontal model tables for shoes. The most simple bedside tables are made of metal.

Bedside for metal shoe

1. It is best to order in the workshop, on the manufacture of metal window grilles, on your sketches, component parts and collect all the houses on the bolts.
2. Side racks - a charter, it is better to make a rod or square with a cross section of 6 - 8 mm, this will be quite enough for a beautiful view and carrier loads. You can order a twisted square and wrought elements for exquisite design bedside tables.
3. Shelves are made from a rolled metal strip with a thickness of 2 mm and a width of 50 mm. It is necessary to provide in the drawing of the place of the attachment that you will produce in advance or you drill them yourself.

Materials and tools for making bedside tables for shoes

Tools for making bedside tables

1. Screwdriver and electrolybiz. Screwdriver - up to 8 - 10 mm diameter of the cartridge. The jigscription will be needed in the case of the curvatures provided for in the design. You can do the usual fine-skinned wood-cutting tree.
2. A set of rasp and abrasive material for stripping flaws.
3. Emery paper, PVA glue, tinting pencils and plugs for confirmates.
4. Marking devices - roulette, carpentry corner, pencil, etc.

Materials for a shoe bedside table in the hallway

1. The quadrature of the materials, it is easy enough to calculate. According to your plan, the scheme, buy a board or laminated chipboard. On the back wall, a small sheet of Fiberboard is quite enough.
2. Behind the legs, handles of the door and the guide drawers, it would be necessary to go to the shop of furniture fittings. Handles - a very important decor element. Beautiful handles on the doors - are drastically transforming and changed for the better any of the most banal.
3. Based on the design dimensions, it will take a timber with a cross section of 30x30 mm and a board or chipboard of at least 2xcm thick.

Detailing the couch for the hallway

1. Behind the conditional unit, you can take a laminated extruded plate from lumber 20 mm thick. It can be revealed in size by independently an electric jigsaw or fine-grained circular saw. If the sawing appears small chips on the ends - do not worry, they are easily decorated with the end ribbon and the furniture corrector of the corresponding color.
2. For the elementary standby, an exemplary approximate pattern is suitable:

• 833x350 - on the sidewalks of the couch;
• 850x350 - on top board (countertop);
• 818x100 - for coupling and base slats (4 pcs.);
• 813x360 - on facial facades.

The rear rear wall is cut out of the fiberboard or organity, and its size will be 830x845 mm.

The dimensions are suitable for a simple horizontal bedside table.

Design frame table design

1. The base of the frame, is made from a bar or steel corner, in the form of a parallelepiped. The frame base is trimmed with a decorative facing slab.
2. The rear wall is made from the DVP on the contour of the bedside table or from the chipboard in the event that a paired mirror is provided with a bedside table.
3. Completing boards from chipboard Go wooden boards are litter with a jigsaw or circular saw. Each plate made drawing with a thin pencil.
4. The end parts that were treated with a hacksaw tool are decorated with a tracing self-adhesive ribbon. There is a wide selection of tracing ribbons, different shades, well combined with laminated chipboard.

Fastening accessories on wooden bedside tables for shoes

1. Transverse courses have a significant role in the reliability and stability of the frame base. The bottom of the frame base is also made of a stronger and thick material. The determining requirement is the stability of the shoe store.
2. Through the corners of the bottom, four holes under the legs are dried. The legs will preferably buy in the furniture store of accessories or make independently from a thick and durable timber.
3. Handles for doors and overhead decorative elements for beauty, give the facade an unusual and individual appearance.
4. The curly elements of the lining can be purchased in the furniture store and put them on the facade part with the help of PVA glue and fix with furniture cloves.
5. Approximately the same decorative facade overlays on the front side of the bedside tables are attached.
6. To eliminate small chips, scratches, chosel and other defects, there is a toning grout and a polyrol for furniture. Salt places are putty, they are rubbed, decorated with a cosmetic pencil and are polished with a special furniture polyrolol.