Folding Swess chair: manufacturing instructions

The manufacture of a folding chair-melting chair has a lot of advantages, since the final product acquires the forms and functions that are necessary for its owner. In addition, it will cost much cheaper than the purchased, and its design will fit into any interior. We’ll talk about how to make a stir-melting chair with your own hands.

Advantages to use the chair of the chaise

This piece of furniture combines two functions: the ability to sit - from the chair, and to lie - from the sun lounger. Before proceeding with its manufacture, we suggest that you familiarize yourself with the main advantages of the Swess Chair:

• An excellent and almost indispensable item for a summer residence that will fit into any corner of the courtyard.

• Some models develop, while taking up very little space. This feature allows you to easily transport the chair from the cottage home or take it with you to rest, for example, at sea.
• Relaxation is another indisputable advantage in the use of a chezung chair. Rest on it soothes the nervous system, relieves stress and pacifies. This item is great in order to read the book, observe nature in the garden or by the river, to sleep well.
• The originality of the appearance of the Swess Chair will help decorate any room or yard. Moreover, in the manufacture of a chair with your own hands, there is the possibility of choosing its colors and design.

Wooden lattice at the heart of a Stezlong chair: Features of manufacture

This model is used not only as a chaise lung, but also as a bed. It has a flat surface and has an adjustable back. The main drawback is the difficulty in transporting it.

This chair is perfect for rest both at sea and in the yard. It will require its manufacture:

• glue tree slabs, the thickness of each is 1.8 cm;
• wooden beams with a section of 4.5x4.5 cm - are used in the construction of the frame;
• the boards with which the sidewalls are sheathed, their thickness from 2.5 cm;
• electric jigsaw or screwdriver;
• drill for working with wood;
• four furniture corners;
• several dozen screws with the presence of secret heads;
• four videos up to 10 cm;
• grinding sheet with fine grain;
• varnish or paints for finishing.

To purchase plates, you need to contact the carpentry workshop or to the construction market. When choosing them, you should pay attention to the quality and type of wood. It is better to give preference to coniferous breeds, since they are more stable before the influence of moisture and temperature changes.

The size of the deck chair depends on the preferences of its owners. The standard value is 0.6 by 1.9 m. Using a pencil and a ruler, it is necessary to draw a project of two short and two long sidewalls. They will serve as the basis of the frame. The sidewalls are fixed with each other with furniture, and their outer side is sheathed with boards.

On a long bar, with an interval of 7 cm, attach the legs previously made from the beam. Their length should not exceed ten centimeters. Otherwise, the Swess Chair will be unstable.

With the help of screws, fix the legs on the surface. In the central part of the short legs, it is necessary to fix the wheels and rollers to facilitate the transportation of the chaslong.

Using a jigsaw, cut boards of the same length, 600x80 mm. Fix the bar on a sunbed with self -tapping screws. The interval between fixed details should not exceed two centimeters. So that the gaps are the same use special spacers.

If the back of a miner is adjusted, then the surface should be divided into two parts: for lying and for the head. These areas are attached to separate boards and are fixed on the surface of the Swess Chairs with the help of door loops.

To make the adjustable bar for the back, it is necessary to fix the bar in the space of the upper section, and on it with the help of screws, install the rack.

To process the finished product, use a grinder and a grinding fine -grained sheet. Then cover the Swess chair with varnish or paint.

Tip: Before starting work, all wooden components should be treated with special moisture -pushing, fireproof and antiseptic drugs that will protect the chair from rapid destruction.

Stezlong chair for a summer residence-fabric option

This model is very practical, easily assembled, transported and takes up a little space, therefore, it will be a great addition to the exterior of the summer cottage.

Due to the fact that this is a mestering chair is easily tolerated, there is an opportunity to sunbathe on it and read the book in the shade.

For manufacture, the presence of:

• rails with a rectangular section, 2.5x6 cm in size: two rails 1.2m, two - 1.1 and two 0.62 m;
• reeks with a round section, the diameter of each is 0.02 m, the number of parts: 1 pc. - 0.65 m, 2 pcs. - 0.6 m, 2 pcs. - 0.5 m;
• cut of special fabric for sun loungers or any fabric with high strength, size 2x0.5 m;
• fasteners in the form of nuts and bolts, as well as wood screws;
• fine -grained sandpaper;
• pVA glue;
• varnish or paints for working with wooden surfaces.

When choosing a tree for the manufacture of blanks, focus on solid rocks in the form of a beech, birch or oak. Since the maximum strength armchair should have maximum strength, and the use of these trees will make the product not only strong, but also durable.

To make a deck chair, it is recommended to use the following varieties of fabric:

• canvas,
• jeans,
• tarpaulin,
• camouflage.

From the main workpiece should first be drawn, and then cut the parts of the desired size. Next, their grinding is carried out, for this, use sandpaper or a special grinding machine.

To protect the tree from the effects of external stimuli, it should be previously treated with antiseptic and moisture -repellent effects.

Take long rails in which drill holes for self -tapping screws in advance. To adjust the sun lounger in several positions, it is necessary to provide the presence of cutouts from two to five, with which the back will drop and rise. To build a seat, it is necessary to drill two more holes on short rails. Between the sidewalls, insert two transverse scarves with a round section, they will provide connection strength. Climbs of crossbars are carried out using PVA glue. After completing the assembly of the frame, proceed to sewing the seat that will be attached to it. In this matter, fantasy is limitless. Use tissue combinations, application, embroidery, etc. This stir-sewing chair will become not only a beautiful decoration of a summer cottage, but also perfect for installation in the room, for example, near the fireplace.

Do-it-yourself chair-Kentukki

To build such an original chair, only bars will be required. It develops very easily and does not take up much space. The design of this steppe-league allows you to get the maximum pleasure of relaxation, as it contributes to the complete relaxation of muscles.

To make this model of a stirring chair, you will need:

• wooden bars, with a section of 4.5x3 cm;
• galvanized wire with a diameter of 0.4 cm;
• glocked steel bracket in an amount of about 20 pieces, they will fix the wire;
• hammer;
• kusachek.

If desired, the bars can be of large diameter, for example, 5x3 cm. To obtain them, it is enough to cut one board, a size of 5x10 cm into three parts. The value of the total length of the bars is 13 m.

Galchasted wire and brackets can replace the studs made of galvanized steel. For their fixation, nuts with washers are used, fixed in the end areas.

After preparing the necessary parts, the holes for fasteners should be drilled. It is better to make them several millimeters more than the thickness of the wire or studs. When all the bars are ready, before assembling, it is necessary to process their edges using a grinding machine.

The assembly procedure consists in stringing the bars on the wire and their gradual connection. First, start collecting the seat, and then the back. When the chair is assembled, cover it with wood or varnish. This will increase the life several times.

Children's chair Shakelong - original and practical

Such a chair resembles a swing on which children will be happy to rest. It is not only quite original, but also convenient, in addition, using various types of fabrics, you get a bright and unusual product.

To make a children's mestering chair, you will need:

• two sheets of ordinary plywood, with a thickness of two millimeters, in a size of 1.8 by 1.6 m;
• six transverse planks, diameter 3 cm, and length 0.92 m;
• twelve plywood planks, with a thickness of two millimeters, 0.94x0.1 m;
• strips of dense fabric, the width of which is at least 95 cm (used in the arrangement of a sunbed and tent);
• decorative elements in the form of jewelry;
• pVA glue;
• shurupov;
• disk saw;
• electrodele.

Do-it-yourself children's instructions for the manufacture of a children's chair:

1. Draw a scheme, according to the size of the sunhead and transfer it to the plywood. Make the necessary parts to work more conveniently, it is recommended to divide a large sheet into squares of 100x100 mm.

2. First, sidewalls are cut out. In places of their fixation with a beam, it is necessary to cut out the recesses, depending on the diameter of the beam.

3. First, a rigid structure with a beam is connected. A beam is placed in the recesses, its fixation occurs using PVA glue and screws screwed from the outer edge. Next, the structure is laid on the side and placed under the press, until the glue dries completely.

4. We proceed to the installation of sun loungers. The interval between them should be from 11 to 13 cm. They are attached with screws. In order to avoid wounds, you must first make recesses for screws or put on special hats on them. When the tree is polished, the recesses are hidden under the putty on wood, and then stained.

5. Before collecting all the details, they must be polished. To do this, use sandpaper or grinding machine. If further painting is planned, then the grinding is carried out after assembly.

6. In accordance with the width of the sun lounger, it is necessary to sew an awning. In this matter, it all depends on the preferences of the manufacturer of the Stezlong chair. A variant of a whole canvas or several parts fastened with Velcro, elastic bands, etc. is possible. But, in any case, it is necessary to provide for the option of removing the tent for washing or repair.

7. Decorate the work using bright parts in the form of soft toys, butterflies, etc.

Making a folding chair of folding: features and recommendations

This model of the chair differs in the ease of transportation and practicality. When building several such seats, rest in the garden with loved ones will be unforgettable. In addition, such a chair is perfect for the living room or bedroom.

To make a mushroom chair, you will need:

• dry strict boards;
• a beam with a section of 3 cm;
• transparent fabric;
• plastic plugs;
• furniture screws;
• furniture bolts.

The board is cut into parts: the back contains two segments of 1.2 m, and the seat - 1 m, for equipment equipment, it is necessary to make stops of 60 cm.

On the legs of the seat, it is necessary to drill three holes, which will serve as regulators of the position of the back. On the legs it is necessary to drill holes for installing furniture screws. Their diameter is 0.5 cm. On the front side, the holes expand to a diameter of 3 cm, and on the other to 1.6 cm.

For the construction, the crossbars are cut into several segments:

• legs and back - 0.57 m - two pieces;
• legs and seat - 0.51 m - legs and seat;
• emphasis - 0.64 cm - 1 pc.

In the end areas, holes are drilled with a diameter of up to half a centimeter, for the installation of furniture screws.

At the end areas of the stop, it is necessary to make holes for installing the crossbar and bolts.

The segment of the fabric is folded in half and stitched in the form of a bag. Keep in mind that at the same time it is necessary to leave a place in order to turn it out. The final areas must be bent and sewn to the crossbar, the seat should turn out to be 1.12 m long.

The most important feature of any chair of the sun lounger is its complex design, but with the right approach to assembly and in the presence of certain skills in working with a carpentry tool, it is quite realistic to make a stir-melting chair at home. In addition, at the final stage of the structure, there is a large scope for fantasy: a variety of fabrics and their combinations, the possibility of painting a chair - a sunhead, will make this subject an original thing in the interior of the room and in the exterior of the farmstead.