Each perfectly understands that the floor surface should always be smooth, because otherwise the material will gradually deteriorate and come into disrepair. An excellent solution of this problem is the grinding of a wooden floor. Thanks to the incredible ease of action, almost any could make them. Obviously, without certain tips, nothing good will succeed, because the process of grinding is based on simple, but important rules.

Paul grinding features

To prepare the floor to the necessary measures associated with grinding, it is necessary to produce some important actions:

• align the surface, and later remove the protective coating to remove various polluting elements;
• next occurs the cyclove and grinding itself, which includes the elimination of defects, as well as some unevenness of the floor.

The purpose of the preliminary surface treatment is the removal of various scratches, fuses and other negative phenomena.

Cyclical and grinding are very important operations, without which it is almost impossible to get a beautiful floor. Prices for grinding wooden floor are quite high, so it makes sense to carry out the full amount of work. Some difficult actions can be entrusted to experts.

Basic tools for grinding

Despite the relative simplicity of the process, it will take a lot of tools for its implementation, which will help to provide an excellent result.

1. Cyclical apparatus. Unfortunately, few people own such equipment, and it is not suiced. It makes sense to rent it or lease from acquaintances.
2. For grinding angular surfaces, the cycle is best suited. There are other devices that are not too different with each other.
3. Putchal is necessary if it comes to possible cracks. You can get rid of them from the substitute for the material, or by filling out the emptiness putty.
4. Emery paper will also need. Moreover, it is desirable to purchase this material with different grain indicators.
5. Already after grinding, for applying a varnish you will need rollers and tassels of certain sizes.
6. The vacuum cleaner in this process will easily remove all the contaminants that are unambiguously present in the room. Cleaning the surface from dust before grinding is a very important effect.

The cycle is a small apparatus that needs to be moved by floor during its processing. If you decide to purchase such a serious, at first glance, the equipment, it is worth understanding that it is necessary to care for it regularly after each operation. In this case, you will need to sharpen the cutting elements of the cycle. It is best to purchase a sharp lump of a small length. Also on sale you can meet diamond bars. They will be somewhat more expensive than classic, but the sharpening itself will occur much faster and better.

Preparation of the surface to grinding

In order for the process of grinding the wooden floor with their own hands, it turned out to be the most simple and fast, it is necessary to transfer all things to another room. If you can not remove certain objects from the room, you should position them in one part of the room, and if necessary, move to another angle.

Often on the surface of the coating there are self-tapping screws and nails, which, besides, can look out a little (even a couple of millimeters). Such elements of the floor are capable not only to reduce the quality of the work carried out, but also damage the equipment.

Grinding of wooden floor at the cottage - a separate topic. Quite often, summer cottages do not have an electricity source, especially during the construction of the house. Obviously, without this, the process will not fully work out.

Preliminary surface treatment

The treatment of the floor surface begins using the grinding machine. To do this, you need to install the 40th abrasive and go through the device along the walls of the room. The width of the drum should be about 200 mm. Next, to achieve the optimal result, the device pass along the walls at an angle of 45 °.

It is clearly worth watching the effectiveness of the machine, because for some reason you can lose a lot of precious time. Sound change when processing the surface may mean the reloading of the drum. To solve the problem, it is enough just to weaken the drum and continue to work. After grinding the boundaries of the floor, you can proceed to the rest of the territory.

The abrasive of the tool is also wearing, and quite quickly. Large grains of abrasive are erased especially intensively.

Main grinding work

1. Using a wooden floor grinding tool, the main stage of work is carried out. Depending on the power of the installation, it is necessary, slowly moving around with a squamous machine, remove all irregularities. It is advisable to walk along the area of \u200b\u200bthe room a couple of times to accurately avoid gender protrusions. The first step of the passage is best done using a large abrasive. This option will not provide the maximum smoothness of the surface, so during subsequent occasions should be preferred to a smaller grain.
2. Before the final stage of grinding work, it is necessary to put all the cracks and chips. Maximum it is important to immediately remove all the remnants of putty so that there are no difficulties in the future.
3. The most serious aspect of most grinding works is to conduct all the necessary actions in hard-to-reach places. This can include zones under batteries, as well as angles. Given the fact that the classic machine has impressive dimensions and is not able to cope with the above tasks, it is better to use miniature installations. Sometimes they are called "boots" and easily cope with all the difficulties. Obviously, the speed of such a device is not particularly high. It is also important to understand that such devices can damage the plinth, so that they should be used with special care.
4. The final stage of surface treatment is carried out using a full-fledged grinding machine, but the abrasive in this case is better to use as small as possible. It will avoid even the most tiny surface flaws. To check the quality of surface treatment, it is enough to spend your palm on the floor. If the quality of grinding does not correspond to the required level, you can once again process the surface treatment with small abrasive.

Other aspects of grinding

It is important to understand that the cost of grinding the wooden floor directly depends on the tools that are used in this process. As mentioned earlier, the Equipment itself will cost the owner of Neszayevo. However, it should be said that many country premises have colossal areas, so sometimes it makes sense to acquire its own equipment. The main action that needs to be performed during the grinding process is a thorough treatment of the floor, so that the need to attract a specialist to this case occurs only when simply no free time.