In order to free the extra room space, you can use the embedded household appliances. Most of the place, perhaps, many occupies a refrigerator. Therefore, it is usually trying to embed into furniture. This is especially true for small rooms in Khrushchek.
Content
The most compact are built-in refrigerators without freezer. They are often equipped with noise suppression and vibration features. Their capacity is usually from 90 to 170 liters. Such a refrigerator can be placed without any special problems under the table top of the kitchen headset.
Built-in models of refrigerators
If the family is large, then you should give preference to a large two-chamber refrigerator. Such a refrigerator is probably now the most common model. Such units are usually separate refrigerators and freezers. And, the freezer can be located both above and below. Many modern models are equipped with all sorts of features and additional capabilities. The inner surfaces are coated with antimicrobial coatings.
Another type of built-in appliances is a wine refrigerator. If the Western countries such refrigerators have already for a long time to settle down, such a unit is purchased relatively rarely in our country. And if you buy it so, it would be a real boon. By name it is clear that it is specifically designed for wine storage. At the same time it supports the most favorable conditions for storage of any wine.
Cupboard under the refrigerator to buy today is not a problem. Therefore, the increasing popularity gets such a thing as optimizing kitchen space. Of course, you can embed a normal refrigerator, but in this case the space in your kitchen will be even less. Indeed, the dimensions of the cooler are added the dimensions of the wooden hull. In addition, in order to open the fridge, you have to open at a time on the two doors instead of one - the cabinet door and the door of the refrigerator. Therefore it is better still to be installed in a cabinet to use built-in models. Especially since today there is an opportunity to place the cabinet-fridge under the window, which will significantly increase the free area of \u200b\u200bthe kitchen facilities.
Advantages of embedded units
- Built-in models have several advantages over conventional. One is the capacity. Indeed, these models occupy less space, but they are quite roomy.
- Many current models have a zero camera that allows you to store food longer.
- Furthermore, such a refrigerator can save on electricity.
- Just because of these aggregates decorative panels have less background noise.
cabinet under built-in models
Embed refrigerator may well be on their own. To do this, you need the following materials:
- furniture handles,
- awnings,
- laminated chipboard,
- tools.
When the size measurements are made, it is necessary to make the furniture scheme. This will help to calculate the true size of partitions and shelves. If the back wall you decide not to set or replaced it with bars, in order to increase the rigidity of the construction, it is necessary to strengthen a few jumpers. To refrigerator cabinet due to changes in temperature and humidity is not broken, the upper part is necessary to make small a mezzanine. It helps take the excess moisture, and thus increase the useful life of equipment. If all of this is available, then you can start working. Assembly of furniture is best done on the previously prepared scheme.
The built-in refrigerator does not have its own decorative housing. Due to this, you can make it with your own hands. You can easily make it under the color of your kitchen. In addition, there is such a system as a pantograph, with which you can connect the doors of the cabinet under the fridge and the refrigerator, and then do not have to open two doors every time.
- The box for embedded equipment can be made independently using laminated chipboard. It is just just a newcomer. It is best to purchase these plates with color and pattern close to kitchen headset. If this set has the complex elements of the cornice and decor, the plates will cost more. But no money to regret them.
- Before the acquisition, it is necessary to remove the measurement from the technique to determine the future size of the cabinet under the built-in refrigerator. When the plates are purchased, you can start marking and cutting parts for the future cabinet for technology. For cutting these plates, it is best to use an electrolovka. Carved parts must be made together with the help of furniture screws.
- In the manufacture of the case for the refrigerator, you must not forget to make the bottom vent hole in the bottom. In addition, a closet should be equipped with a small podium. The back wall is not needed. In order for the wardrobe at exactly, when it is installed in place, you should use the construction level.
- When the box is ready and installed in place, you can start assembling the recessed refrigerator. The door of the cabinet under the built-in refrigerator should be arranged according to the Pantograf system, i.e. Two doors are combined. At the same time, it is important to properly adjust them so that they opened silently. Slices of plates that remain open should be masked with a paper edge.
When installing embedded furniture, several important nuances should be taken into account. Almost any models of the built-in refrigerator have a personal door cannon system. Some models do not have a system of hinges.
Today, models of refrigerators with doors that are equipped with special hinges are also found. In this case, the doors of the technicians openly discover each other. When installing a similar system, it is necessary to competently distribute the mass of the door between the hinges.
Is it possible to build an ordinary refrigerator?
Sometimes the usual refrigerator spoils the appearance of the kitchen, in this case it can be embedded in the closet. If the doors of such a refrigerator and cabinet do not fasten, they will open separately. In order to solve this problem, you can construct a special niche for technology without hiding the facade. But in this case, it is necessary that the refrigerator itself has an attractive appearance, and best of all, if it was combined with the style of your kitchen. In any case, the best option is the models of refrigerators that are originally designed to embed into furniture. Sometimes, the refrigeration and freezer is available separately, but at the same time they are still a single set. One of them can be placed in a wardrobe under the windowsill.
Before embedding the refrigerator in the closet, its dimensions are measured with a conventional roulette. It is necessary to measure the width, depth and height of the equipment. During installation, it is important to correctly arrange the radiator. In the new models, the radiator is usually located below, and the old ones on the back side. It is important that the radiator does not come into contact with the cabinet case, because otherwise all vibrations will be transferred to furniture. Therefore, there must be a sufficient gap (2-3 centimeters) between the radiator and the inner surface of the cabinet. In addition, the gaps will make it easier for installation and ventilation. Rear wall can not be installed at all.
As a material for walls, regular chipboard sheets can be used. If the material is purchased in a special store, you can ask you to cut it on the desserved size right in the store. In addition, you will need handles on doors, fittings and fasteners. Before embedding the technique, the front of the refrigerator can be placed under the color of the cabinet. Finally, you will need a cabinet case, which will need to be collected and installed in place. Doors should be installed when the technique is already placed in the closet under the fridge. The photo in this article shows how it will look like in the end.
Note:
- When you try to embed an ordinary refrigerator to a closet, it is impossible to equip the bottom, and this will make the design very unreliable and harp.
- In addition, the cabinet for such equipment will have to have much greater depth to accommodate the fridge of the outdated sample.
- Such a closet will be very cumbersome and width. After all, the usual refrigerator itself has large dimensions.
- You also need to consider the number of future doors. Since you have to open at least four doors. They should be equipped so that each of them opens freely.
- In order to improve the ventilation of the cabinet under the usual refrigerator, the furniture should not be present at the back wall, and this makes her design worse. As a result, the cabinet is harvested, which can be stagged.
