A variety of objects that do not find applications in ordinary life can be used to create garden furniture. In this case, it does not matter at all, whether such furniture has a certain style or maximum convenience. The main thing is that everything looked well and has arrived during the rest.

We can decorate most of the furniture. The main thing in this business is to show interest and some creative skills so that you can look without shame to look at your crafts.

The main features and advantages of garden furniture

When it comes to garden furniture, first of all, there are in mind the chairs and tables made by their own hands. Indeed, it makes no sense to acquire expensive garden furniture from wood and other materials, if you can create something very good.

Among the materials that will be needed in this case will be present, fabric, as well as plastic. Especially in appreciated wooden garden furniture. Thanks to the properties of wood, you can easily create a chic element of garden furniture without the cost of time and strength.

Creating chairs and tables from logs

Chairs and tables are the main elements of garden furniture that can be made with their own hands. Definitely, for this we need a huge log. If a tree dried on a certain place of your site, it is best not to do a penalty immediately, but to create a comfortable garden chair. For almost all manipulations, we will need an ax.

1. The trunk of a tree must be at the meter-half meter.
2. Next, we must cut out the extra part of the trunk, so that a comfortable back remains. This element should be slightly tilted back, otherwise it will be completely uncomfortable.
3. After all successful actions, it is necessary to process surfaces to ensure the absence of offices and other protruding elements. For this, sandpaper can be consolidated. But it will be easier to organize it all if there is chainsaw at hand. At the same time, you can grab our future chair at all and place it in any convenient place. Of course, it does not fit for the room - much weighs, and the appearance is not the most chic.

The creation of the table is also extremely simple and understandable.

In this case, the trunk of the tree should also be at the level of one meter, and the table cover will be placed on top. The cover itself harmonized with a common view of the table, it is best to make it yourself. It is extremely easy to do from shot down boards. Excellent assistant, again, will be chainsaw. All fasteners are made using nails and screws. If in the future the table is planned to be used for meals, it is best to treat the surface of the cover of the lid emery. Ideally, it is better to cover her varnish at all, which for many years will protect wood from aging and precipitation.

If the trees and chairs from the trunks of trees are constantly going to the dirt, especially after precipitation, it is best to pour a territory around gravel. Then even after the shower, you can enjoy the rest on your favorite stool from the log.

Creating tables and chairs and thin logs

Obviously, massive logs are highly rare. It is much easier to find thin logs, of which you can also make garden furniture with your own hands. Look all this will not be quite presentable, but applying small knowledge, you can create a huge size table for which the whole family will fit. The most massive logs should be chopped into the ground - they will act as the feet of the future table. It is best to combine several logs so that the stability of our garden furniture is maximum. The table cover is knocked out from various boards, and the bokes are edging - also from small but long logs.

Bench of logs of different quantities

Many drawings of garden furniture look quite seriously, and even the simplest moments of them are incredibly difficult to implement. Bench from logs is created as soon as possible. Despite the low aesthetic qualities of such furniture, resting on it is madly pleasant and convenient. The most important point in this situation is the presence of a massive log. If it is long, then it's just fine.

1. We saw it across two equal parts, and one of the resulting parts we cut along. It will be a back and seat.
2. The second part of the log will be required to cut across. These two parts will act as a support. Also here are two boards that will keep the back of the shop.
3. All attachments here should be performed using massive nails. However, in the legs, you can make a small furrow, in which the very log will be perfect on which gardeners will sit.

Creating a garden chaise lounge with your own hands

Gardeners with "Golden Hands" can try to create a truly chic chaise longue, which will be an excellent leisure agent. It will take a lot of time on his creation, but the result obtained will be simply phenomenal. To create a lounger, we will need:

• fasteners (nails, nuts and bolts);
• pVA glue;
• birch, beech and oak rails with different sections (rectangular, round);
• tarpaulin or any other durable material (about 2 meters in length and 50 cm in width);

Much here depends on those dimensional lounge chairs that you want to obtain ultimately. For the average person, the following dimensions are suitable for the average: 2 pieces of 100 cm, 2 pieces of 62 cm, 2 pieces of 120 cm, 2 pieces of 55 cm, 2 pieces of 60 cm and one bar - 62 cm. The section should be within 2 cm.

All rails must be qualitatively stolen. Next, you must do on each bar the required number of holes with a diameter of 8 mm. The drawing shows how to create this garden furniture with your own hands. The most important thing is attentiveness.

1. On the two largest bars should be special serifs - to regulate the tilt of the back chaise lounge.
2. On square rails it is necessary to do openings 2 cm each. W.
3. we put round rake on them and plant PVA glue.
4. Dry it all must for the whole day.
5. After that, we have a complete assembly of all parts of the deck chair. Tarpaulin is pre-played in Round Reiki, but it can be done already after assembling the entire design, but to shoot the tarpaulin directly on the chaise lounge will not be easy.

For the manufacture of garden furniture with their own hands it is best to use exactly oak. This material is maximally resistant to precipitation and is able to easily cope with any loads. Separately buy boards and logs from oak, it is better not necessary. Ideally take advantage of available resources.

Creating a Garden Table based on Brick

In many photos, garden furniture is also done from natural resources. If you have a little bricks after repair or creating a private house - it is best to use exactly to create a gorgeous garden table. Brick in this case will act as a base. Obviously, to create a table cover, an indispensable material is wood.

The base should not consist of a "brick turret". It is important to equip a small foundation on which our future table will be based. The foundation will also consist of bricks located all over the perimeter of the "Rest Area". As with construction, it is the cement mortar that will strengthen the brick component of the table. The base itself must be in the center of the table. Otherwise, their unsuccessful location can be extremely uncomfortable during the rest at the table.

The basis, as in the case of creating a wood table, is also created from shot down boards. After the arrangement, it is necessary to process the surface with sandpaper and cover with varnish or paint.

Creating tables from boards

Plastic garden furniture will never replace wood that has so important aspects of quality and reliability. Create a garden table from the boards is incredibly easy. Supports of this table can be simply like a kitchen table legs, but best to make them x-shaped. For this, the bars will be needed 100x100 mm. In order for all this to be gained, it is necessary in one of the bars to make a special cutout, as in the image. Before using the table, it is best to check their stability, as wood is sometimes extremely unpredictable. To create the foundation, we will need 6 bars 50x100 mm. For fastening, special glue can be used or screws. The latter is preferable. The video below shows how such garden furniture is created with their own hands.

Conclusion

Despite the overall simplicity, it is such wonderful chairs and tables will not replace plastic garden furniture, which are filled with all building supermarkets. Incredible practicality most often takes the top and this case is no exception. Of course, there are also metallic garden furniture, but its cost is unlikely to please those who are not ready to spend on the usual elements of the convenience of thousands of rubles. It is better to take advantage of the reservoir materials and create exactly what I want.