Folding wooden table for kitchen with their own hands

When you need to save the area in the room, the most reasonable to install folding furniture. For example, in a small kitchen it will easily fit the folding wooden table, which can be made with your own hands. Also, such furniture is very practical, because it can be taken with you in nature, to the cottage, put on the loggia. You can make the table yourself, considering the size and selecting the necessary materials.

The folding table is easiest to do from a tree or from a pressed board (chipboard, fiberboard). A feature of such furniture is not only simplicity of manufacturing, but also saving the family budget, as well as the ability to install the table in the place where the usual large table does not fit.

Folding wooden table for the kitchen. More about what kinds of tables are

Before you begin work, there will be no information on the varieties of folding tables for the kitchen. All of them are different, differ not only in shape and size, but also by functionality, as well as manufacturing materials.

Now more about all nuances:

1. Material for the manufacture of the table is chosen taking into account all the requirements. If the table is needed for homemade to install in the kitchen or on the loggia, then the easiest way to make such compact furniture made of wood. But if there are frequent treasures on nature or a table will come in handy for summer cottages, then it is best to make a lid from a more durable and durable material. For example, aluminum or plastic (plastic - for tabletop coating).
2. As for the tables made of wood: the durable material, non-toxic, practical and looks like such a table beautifully. Suitable for any interior. Naturally, the tree cannot cost a penny, so the wooden table will be slightly expensive at cost than made of plastic or aluminum. It can also be said that it is difficult to work with a tree, not only time, but also certain skills, as well as special tools.
3. For the manufacture of a wooden table to the kitchen with their own hands, the pine, oak or nut is suitable.
4. Tree - material, though durable, but very capricious. Therefore, from time to time it will have to polish the worktop, as well as to cover with varnish.
5. As an alternative to the tree - the manufacture of a table of a tip or pressed sawdust (these are chipboard and fiberboard). If you do everything yourself, then the slab end should be placed with a special film so that moisture does not fall inside. It is possible to coating with silicone, and the top of the countertops is desirable to further protect the plastic panel.
6. The legs of the homemade table can be made of both wood and from another material (steel, aluminum). A good option is to make legs made of wood, shape and size - can be different and depend on the size of the table.
7. For the stability of the design, the legs can be placed in parallel or crosswise. The first option is the standard, the second option is more reliable in terms of sustainability, only to sit at such a table, freely shoe legs, it will be inconvenient.
8. The table shape or countertops can be standard rectangular, in the form of a square, round or oval. The most popular option is the manufacture of tables with a tabletop of a rectangular or square shape.

Advantages and selection of materials for folding wooden table for kitchen

Undoubtedly, the main advantage of the kitchen folding table is his mobility. That is, the table should be easily folded and decomposed, and if necessary, it can be transferred to another room. Naturally, the lion's share of such movements falls on the fragile shoulders of the hostess. Therefore, the choice of material is the main criterion. The table made from the wood array will be durable and durable, only to lift and move such a table already problematic. Especially if the dimensions of this table are impressive. It makes no sense to make a table of expensive material. Therefore, the perfect option for the manufacture of the kitchen table with your own hands is the plates of chipboard, Feds or LDSP.

What should be the tabletop? The choice is huge, you only need to decide and pick up the material for the manufacture of the table with all the needs. It can be a chipboard, a MDV panel, a kitchen table top, made of chipboard with protective durable coating (vinyl, acrylic), as well as a furniture shield. The only wishes to take into account the load on the selected surface.

What should be the mechanism of the kitchen sliding table:

1. The mechanism of "book" is the easiest and most common. This is a classic from which many people do not want to refuse. This table has both pros and cons. Plus - simplicity of manufacture, minuses are more because if you deploy such a table, then the person who will get the place in the middle will feel uncomfortable because the feet there is no place, they rest in the feet of the table. In addition, if you have to flatten the table, it needs to be constantly deployed and moving. As for aesthetics, the table looks boring, this option is considered the most common and budget.
2. The sliding structure is a fixed frame with firmly screwed legs. The legs remain motionless, and the upper part, that is, the countertop is modified. It can be shifted to the side or reveal completely, but for this you need to push both halves, and insert an additional additionally stored space in the resulting space. Such folding furniture is more suitable for spacious premises.
3. And one more variant of the mechanism with several layout options, depending on the destination: the worktop can be moved to insert another segment, folded in half, open only one half, turn perpendicular to supplement the second half of the table top.

Wooden table in the kitchen with their own hands. Photo:

Wooden table on the kitchen with their own hands

In order to make the table with your own hands, a drawing is needed. Sketch can be made with a pencil, taking into account the height and width of the table.

Table do it yourself from a tree. Blueprints:

What instruments may need to work:

• building level and pencil ruler;
• screwdriver, and better than a screwdriver;
• lobzik (manual or electric);
• corner, grinding or sandpaper for wood surface treatment.

Also, depending on the material selected, other tools may also be needed, it will turn out along the work.

How to make the table do it yourself:

1. To make furniture and spend a minimum of time, pay attention to the attachment. Such a table really does not occupy a lot of space, but you can make it in just a couple of hours.
2. The design of this table is extremely simple: consists of the main carrier part, which is fixed on the wall. When the table is needed - it leans. Different materials are used as limiters: chains, folding or mechanical bracket, legs, which can also be folded and decomposed if necessary.
3. First you need to cut out the chipboard sheet of the worktop of the desired size. We recommend this work to trust the specialists and order a cut on a furniture factory. At the same time, you will get a finished tabletop with a treated edge.
4. It will only be necessary to attach a worktop on the loop to the wall, fasten the legs to the wall and the table top.

In more detail how to make a table on an ambulance hand, watch the video:

Folding wooden table for the kitchen. Table-transformer do it yourself

Such a kitchen table is an unusual and modern version, but to independently make furniture such a design, you will have to be performed in all the subtleties of this process, because the mechanism is quite complex and better calculations to entrust experienced specialists.

We recommend:

1. Order a project with a transforming mechanism.
2. Buy panels for the manufacture of countertops (from the leaf of chipboard), plus legs.
3. Purchase fastening element, screws and screws.
4. Select a variant of the folding mechanism, perform an initial fit of all parts according to the drawing.
5. Make a frame, install a countertop.

If I still want to save, then you can make a drawing of such a table using a special program. It will be necessary to draw a table layout, perform miscalculations of the amount of materials. By the way, the program can be mastered in a couple of days with a huge desire.

In the store where you will buy a stove for the manufacture of countertops, then buy fasteners and order sawing panels.

The work plan is:

1. In order to assemble all the details according to the drawing, you need to mark the markup for fasteners along the sliced \u200b\u200bpanels with a pencil. Thus, it becomes clear where you need to drill a hole for the screws.
2. Assembly is the most interesting stage of work. If there is a ready-made project in your hands, it remains only to arm a screwdriver to collect all the details.
3. As for the standard size of the table transformer, then height it can be from 750 mm, wide from 800 mm, and the length of a folded form is only 282 m. The countertop can be divided into 2 and 3 parts.

Table of wood with your own hands. Photo:

Folding wooden table for the kitchen. Round table with your own hands

Many owners round tables are not satisfied. The reason is known, because everyone is used to the furniture of standard forms and sizes. But you can and break the stereotypes of the years and turn your own even a small kitchen into a cozy and beautiful place for cooking and eating.

Pluses of round tables:

• originality;
• there are no sharp corners, which is very important for families where small kids will grow;
• the diameter of the smallest table for the kitchen is only 1 m, and holds up to 6 people at the table, and all those present at the table will see each other;
• the table can be moved to the wall, and in the resulting space put a high highchair. It turns out a closed space - and mom calmly, and baby safe.

Of course, the best and durable material for the manufacture of the table is a tree. But if the room is small, then the massive table can capture all the free space. You can solve this problem like this: you need to paint the wooden table into light tones, then it will visually seem less. Plus legs should be elegant, and the table top is thin.

How to make the table, read this video footwear: