When repairing the bathroom, you need to take into account the many nuances. No need to forget that in this room the most moisture accumulates and, at the same time, it is usually not ventilated, i.e. There is simply no circulation of air. Therefore, the repair of this part of the apartment needs to pay special attention. So, every caring owner wants the walls in the bathroom to serve a long time and retained an attractive appearance. For this you need, first of all, carefully choose building materials. To date, there is a fairly large range. Therefore, the selection of the material you need should not be an intractable problem. Consider several options for finishing wall bathroom with your own hands.
Content
Wall decoration options in the bathroom
Ceramic tile
This material is perhaps most often used to finish the walls in the bathroom. This contributes to a number of advantages, the most valuable of which is environmental friendliness and moisture resistance. In addition, the tile in the bathroom on the walls does not fade and does not change the color and shape, therefore, is capable of long time to maintain its original appearance.
Today, you can find a tile with a variety of color shades, panels, inserts and ornaments. Different materials may be different. So, you can find both small tiles, with a size of 50 × 50 mm, and large - 650 × 300 mm.
It should be said that cladding of the walls of the bathroom with tiles is quite a difficult matter. Therefore, to obtain a qualitative result from the first time, if you have previously had no experience in such work, it is recommended to refer to professionals. If you want to make the walls of the walls, it follows during work to be particularly attentive with seams. In particular, to improve the quality of the final result, it is necessary to choose a moisture-resistant grout. It will protect the seams from fragmentation of moisture. In addition, it is necessary to remove all the voids under the coating, in which moisture could accumulate, because it, in turn, can lead to the formation of mold.
Plastic panels
This material is also quite often used to finish the bathroom. We note its main advantages:
- It is distinguished by its economy and practicality. These panels are quite simply installed. Therefore, even a newcomer to work with them.
- Plastic walls in the bathroom are not terrible temperature fluctuations and an unstable level of humidity.
- Another undoubted advantage of this material is ease of care. So, in order to wash plastic, you can take a simple rag moistened with a chemical solution. By the way, in the same way you can wipe the tile.
It is also worth noting that before installing plastic panels there is no need to align the walls, which will be said below. It is enough just to mount frame racks, after which they are on top to fasten plastic with simple self-tapping screws. The pre-working surface is covered with a special moisture-repellent composition. This will prevent the formation of condensate drops on the back of the panels. It is even desirable to handle the joints with the help of sealant. All this will prevent the appearance of mold plastic appearance.
The selection of plastic panels today is quite large, and the range is extensive both in texture and coloring. It is recommended when choosing not to give preference to the panels too light shade, because They will gradually fade and turn yellow.
Finishing with porcelain stoneware
This is one of the most worthy competitors for ceramic tiles. Its cost is higher, but slightly. In addition, porcelain stoneware even exceeds the tile. In particular, it is more durable and vitality. In addition, it can be imitated by even various breeds of natural stone. Porcelain stoneware is rather durable, it has the quality due to resistance to temperature fluctuations and moisture. Thus, it is one of the best materials that can be used for a successful trim of the bathroom.
Adhesive tape
This is one of the cheapest ways to finish the walls. Self-tight waterproof, so it is suitable for the bathroom perfect. To still increase the protection against moisture, the seams after sticking are recommended to treat silicone sealant. Today, you can find a film that simulates natural stone or expensive wood breeds. Such options look very well on the walls in the bathroom. Photo examples can be seen below.
Glass tile
This is a rather attractive material that will look great as decoration of walls in the bathroom. It has many properties that are available from ordinary glass, including a smooth surface. In addition, it is not scared by the effects of bacteria and fungi. With this material, you can simulate a silver or icy surface.
Today, you can find such a tile with an applied holographic pattern that literally "comes to life." In addition, the glass is good because visually makes the room more. The choice of color solutions for this finishing material is now large enough. Of the shortcomings of the glass tiles, first of all, you need to call a high cost. Therefore, it is more often used as an addition to ceramic tiles.
Facing a tree
Another option of finishing bathroom walls is wood paneling. It is quite expensive finishing material, but it looks very attractive. It is not surprising that it is so popular. The main front casing - treated wood special repellent. Next, the tree is covered with lacquer. Moreover, when mounting is necessary to conduct alignment surfaces and material to fit the size.
Such finishing rather complicated. Therefore, they must comply with professionals who know how to use a special construction equipment. In general, he finishes the process takes a lot of time. Particular attention should be paid to the care of the wood surface. That will have a very beautiful and, more importantly, long-lasting siding. Externally, these walls look very respectable.
waterproof paint
You can just go and paint the walls in the bath - this is a relatively cheap option of finishing. Once the paint must always be water-resistant, which is usually indicated on the bank. Typically, moisture-resistant materials marked "red duck."
How is the painting of the walls the bathroom? First of all, you must be well prepared work surface. These works are considered the most time-consuming. They include cleaning the walls of the traces of the old finish and removing materials that are poorly kept. You also need to get rid of stains grease and dust, which may well be present on the wall. Major irregularities can be smoothed with plaster and small - neatly hide the filler. The working surface should get a perfectly smooth. Otherwise, after a painting on the wall will be visible any defect.
After drying, it is recommended a good sanding surface. Further, the wall is painted by brush or roller. The main thing - do not use the bathroom until the paint on the walls completely dry. For such a finish in any case you can not use a cheap mix. After all, they can crack and peel off. When choosing colors should be given preference to one that is resistant to moisture. No less important properties such as environmental friendliness, ease of application and durability. Under these requirements are often suitable acrylic and latex paints. Sometimes you can find good emulsion mixture.
linoleum finish
Those owners of apartments that want to finish the walls of the bath in an extraordinary way can use a special linoleum. This option is relatively inexpensive. In addition, such special skills and skills are required for sticking such material. By the way, the finish can be made by the usual linoleum for the floor, but it is only as a last resort. It is best to use a material designed for lining walls in the bathroom.
For sticking linoleum, any building glue is suitable. Previously need to progress the base. In addition, all the seams need to be sealed. This can be done with hot or cold welding. The most problematic sites are recommended to be treated with silicone sealant.
Unfortunately, today there is a small selection of drawings that will look good on the wall. The linoleum is not suitable for these purposes or with an ornament under the "stone", "tree", "marble". Finishing such material visually will make space less. The room will seem darker, more gloomy. Therefore, it is better to choose a linoleum of a light shade or to give preference to another finishing material.
Stucco walls in the bathroom
It is known that shuttering of the walls is performed before laying of ceramic tiles or painting. Nevertheless, the plaster is used as an independent method of finishing.
Previously, only mixtures on a cement basis were used. But today you can use ready-made dry compounds that differ in additives and plasticizers. If you compare them with a mortar of cement, then they are primarily simpler in application. In addition, dry mixes are reliable, do not give shrinkage. When the applied plaster will dry up, the surface does not appear on the surface, the unpleasant stroke cracks and chips, which usually spoil the entire appearance. After plastering and primer, the wall can be painted immediately.
Nevertheless, the use of plaster as finishing material is not devoid of minuses. In particular, special knowledge and skills are needed for proper plastered surfaces. Therefore, a person who does not know about this will be difficult to fulfill these work. If you still learn at least the basics of the application of a solution, consisting of several stages, then all work can be made pretty quickly and without much effort.
Today, in the market of building materials, you can find several types of plastering mixtures. Including embossed, which allow you to hide defects on the walls.
Finishing Mosaic
Mosaic looks very beautiful in any room. For its production, materials such as ceramics, glass, stone and some others are used. But this option finishes is one of the most expensive. But if you can afford it, then with the help of a mosaic you can create a truly unique design. Although, you can decorate the existing figure.
Today it is possible to purchase a mosaic that is already glued to the polymer grid, which will save you from the need to acquire special knowledge and laying skills. When using such a finishing material, it will be necessary to simply make the brace of finished sheets on the working surface in the same way as the ceramic tile laying is performed.
Stickers for wall decor
After finishing, you can decorate the walls with the help of stickers that will add individuality interior. Patterns for this can be chosen ready or order specifically in printing. In any case, stickers must be moisture-resistant, as well as the material itself to which they are pasted. Only then the initial decor will be able to last long enough.
Alignment of walls in the bathroom
So, you decided how to separate the walls of the bathroom. But before this you need to carefully prepare the working surface. First of all, it is recommended to get rid of all available irregularities. Alignment work can be performed by various methods. But before deciding which one to use, you need to clarify the degree of surface irregularities.
So, if irregularities are noticeable only in some places, then cheaper and easier to use professional gypsum mixes. To do this, you will also need a bucket or pelvis, as well as several spatulas of different sizes. The amount of water required for preparation depends on the type of the bought mixture. First, the solution is applied on irregularity with a small spatula. After that, with a spatula of a larger, it is distributed over the working surface. How even it turns out the wall as a result, it depends not only on the amount of the applied mixture, but also on how it is distributed. For more thorough alignment, it is recommended to use long and direct items during work, for example, smooth bars. When the mixture is applied, and thoroughly aligned on the wall, you need to give her time so that it will be frozen. After that, you should walk on the surface of sandpaper. This will remove excess irregularities, because They will remain in any case.
If the walls in the bathroom are so curves that they have potholes and other visual defects, it will not work out the irregularities of the plaster. In this case, it is better to "put in order" the surface with moisture-resistant drywall. For these works, besides directly sheets, you will need a metal profile, a hacksaw or scissors, a mass for grouting seams, as well as various fasteners.
When aligning the walls, it is important to install a crate of metal products correctly. This stage of work needs to be paid special attention. After all, it is from him that the final quality of the alignment of the walls will depend on it. In order to correctly install the frame, the construction level and the corner will be useful. Guides are attached to the working surface with the help of a dowel. The material sheet should lie on the crate so that it is perfectly even with respect to the floor and to the ceiling.
Hyposcard on a metal profile is usually fixed using selflessness. For one sheet, they will be required at least 3-4. The stove can be fully located on the wall. In this case, fasteners will already need more. If one sheet of plasterboard is not enough, then the material can be cut with a building knife. To do this, first makes a cut in the upper layer, after which the sheet is neatly overlaid, and then cut the second layer.
