Materials for the manufacture of garden furniture

On the plot, an important element of landscape design is garden furniture. When choosing a style and design, keep in mind not only the convenience and quality, but also the fact that she would have a long time to be outdoors. Accordingly, it should be moisture resistant.

Of course, garden furniture made of rattan or molded plastic is better to buy ready-made at the store. With a little imagination and expending a minimum of means you can make authentic furniture made of wood, with forged elements or other original features. This furniture is characterized by low cost, strength, and most importantly - uniqueness. The second such set will not be none.

Wooden garden furniture in the style of "Provence"

Simple peasant style decor called "Provence". For a holiday or a garden plot this furniture is very suitable. A bit rough outlines of the table and just hard to shop, not only convenient for al fresco dining, but also fit perfectly into the garden landscape. This garden furniture the hands of the forces, even a novice.

1. For the manufacture of the table, take the 50x150 mm board. A tabletop is spliced \u200b\u200bout of it. From the back, two crossbars with a cross section of 40x50 mm are styled. The legs are attached to the self-tapping screw at the top, slightly divide them on the sides for stability. At the bottom of the legs, fasten the transverse boards and connect them to the longitudinal fastener or timber.
2. Approximately shops or benches are made. For starters, sidewalls are collected from the boards and bar. Ladst fastening bars are attached to them, and the frame is trimmed with a board.
3. Such garden furniture made of wood needs additional processing. First of all, it needs to be cleaned and sideways again. Two or three times to soak naturally with natural oil and give to stand up to complete drying. Then the wooden furniture is covered with an antiseptic. After that, it is possible to paint it, open the verse and handle varnish.
4. The large palette of Morilok and colored waterproof varnishes make it possible to give garden furniture. Natural color of the tree of any breed. Varnish coating is made in two or three layers. The last layer of finally dying varnish is polished and polished with a soft felt or felt sponium.

Folding wooden furniture for garden and giving

This light laptop folding furniture is very convenient. It does not take up much space, and in case of rain and at night it can be quickly covered in a dry place.

1. For the countertops, you can dial from the board 20x50 the lattice canvas and begged it with the "Z" screws - a shaped screed. The legs are made in the form of the letter "X". A hole and legs and legs are drilled in the crosshair, sitting on the heel. Metal washers and bolts are set to the position of the free stroke and are fixed by the locknut. From one, the upper side, the legs are attached to the back side on the loop, and on the other hand there is a stopper. In its quality, you can use a metal corner, and the loops will suit the usual - the target.
2. Folding chairs from wooden plates are manufactured in the same way. The backrest is taken as the basis, and the seat and the front legs are made on the hinges with stoppers. All wooden products need to be prolifened, soaked with an antiseptic and open lacquer or paint. End of legs, which come into contact with the soil, can be secured from the influence of moisture using plastic or rubber nozzles.

Advantages of Rattan Garden Furniture

Natural rattans are dried palm stems from Southeast Asia. Produced in Indonesia, Malaysia or Philippines are very popular. Artificial rattan is an excellent substitute for a natural palm vine. Garden furniture from a substitute for a rotangling vine or a polyaromantium is much cheaper and moisture is not afraid.

1. Wicker garden furniture from rattan is distinguished by high quality. Dried palm stems, have a dense, plastic structure and very durable. Special care for such furniture is not required, given that this furniture appeared in countries with hot and humid climates.
2. Products are affected by their diversity. The choice is offered from comfortable chairs a rocking chair to wicker sofas and cozy canteens. Wicker furniture harmoniously fits into the natural landscape and harmonizes with a dacha garden landscape.
3. Rattan - has a natural beige color with some variations of shades of light brown. High-quality furniture, processed at the production of antiseptic and a means of wood pests. Special care for garden furniture from rattan is not required, but in bad weather or at night it is desirable to be taken into the shelter.

Characteristics of plastic furniture for the garden

It is impossible to make a litter plastic furniture for the garden independently, and it does not make sense. A large selection of such furniture is in the store and it is not expensive. Plastic garden furniture, the photo of which are posted on the Internet surprises with its diversity.

1. The main advantage of garden furniture from plastic is the impetitudation of corrosion and low weight. Such furniture is not afraid of night moisture and rain. No special care for plastic is not required, it is perfectly cleaned by soap sinks and resistant to chemical preparations.
2. Plastic furniture does not paint, she gives a color in the factory conditions even until casting. The outlet produces furniture made of homogeneous colored mass with a characteristic matte or glossy tide. It is planned to resistant to ultraviolet radiation and impact of bad weather. The injection plastic properties allow producing furniture of various design and destination.

Forged furniture for the garden and summer cottages

Forged products, as a rule, are highly artistic works performed by cool masters and cost a lot of money. They combine openwork ease, high strength and durability.

1. There is a way out, wrought garden furniture can be made it yourself. Choose a square or round rod, cross section 10 - 12 mm. In the workshop on the manufacture of window lattices, it will be deposited to you and boil on your sketches or will be offered your sketches.
2. It will take the frame base for the table and benches. Do not forget to provide for fastenings or ears for wooden trim. In the workshop, there will probably have forged elements that are welded on an intricate lattice, creating the illusion of a fully wrought pattern.
3. Imitation of the grape vines, floral wanden elements or ornamental patterns twisted in the spiral square and other elements will create a unique design of a garden furniture kit.
4. Usually the finished product is covered with soil paint, the color of which is negotiated in advance. You can paint in any color you like and even decorate some elements with golden, bronze, copper or other imitating non-ferrous metal dye.
5. From prepared and opened with varnish slats or bars, a tabletop is made, seat and backlacks. They are attached to the bolts with a round head. It is best to purchase such stainless steel or bronze bolts.