Microwave is almost an integral part of each kitchen, but features her Installation knows not everyone. On the types of fastening for the microwave and the features of this process will be talked further.
[tOC.]
Content
Microwave Overhead Options in Kitchen
Microwave for many people is indispensable assistant, with help Which heat or defrost food is obtained very quickly. Modern models of microwave are endowed with a large number of functions, increasing their them popularity.
But, it is the owners of small komko There is a problem in where to place a pretty overall device in the form of a microwave oven.
Most. common An option is to install the microwave on the working surface. On the one hand, no fasteners will be required, but on the other — The device takes a decent part of the table top, cut and process products becomes more difficult.
Yet A windowsill appears in one option of the microwave furnace. it maybe when he possesses defined sizes and power, to hold the microwave. In addition, there should be a place near the outlet. Among the shortcomings of this Places highlight the formation of condensate in the winter season, because the cold, and from the microwave oven, during operation — warmly. In addition, the windowsill can not be installed room plants, due to radiation, which comes from the microwave.
In the presence of not too high refrigerator microwave furnace installed directly on nem.. Although it is also inappropriate, because it is heated in the process, and the refrigerator radiates heat.
The most successful version of the microwave furnace is her Hanging using brackets. V it is Case, the microwave is installed on any convenient area of \u200b\u200bthe wall.
The use of the suspension shelf is also an exception that allows reliable Fix the microwave. The main condition for this type of installation is the presence of free air ventilation, which ensures the performance of the microwave. If this is not done, there is a risk of overheating of the device.
In order to increase the free space of the kitchen, the microwave is embedded directly into the kitchen set. But this variea nT Leagueeating to provide in advance yet At the stage of manufacturing furniture.
Microwave on wall - Features Fixation
The main function of fastening for the microwave on the wall is an increase in the free space in the kitchen. Several options for fastening the microwave furnace are isolated, which differ in color and decorative solutions.
Tse on The installation of mounting work on the installation of the microwave oven is quite high, so cheaper her Install yourself.
Note, not all microwave ovens are able to attach to the wall. Overall structures will not be able to fully resist it. Special requirements are presented to the wall on which the microwave oven is attached. It must be durable, preferably made of concrete or brick.
There are several varieties of fixtures for microwave. In the ratio with the color range allocate:
- white;
- gray;
- gold;
- black Fasteners and shelves .
The most popular are white and silver colors, as it is exactly the microwave ovens alone from the most common.
As the main one fastening An element for the microwave ovens is used by a bracket having drilled holes through which it is fixed on the wall. Next, the sliding linings are fixed on plastic plugs and their holes.
Also, do not forget about the power grid, since the microwave must be attached in the place where there is a socket or possible her Subsequent installation.
There are two main options for mounting the microwave on the wall:
- installation on the surface of two parallel supports installed around the perimeter of the furnace, at any distance, which depends on her size;
- mounting onbeam, on which There are parallel supports, this option is more durable .
Fastener for the microwave on the wall and its choice
Go up to the question of choosing fasteners to fix a microwave oven on the wall follows with special responsibility, because the quality of fastening and safety of people in the kitchen depends on the quality of fasteners.
Among the main parameters, defining The type of fasteners are oven and overall design weight. In a ratio with dimensions, the brackets are distinguished by a variable length, so they are customized depending on the length of the aggregate.
They are selected under certain, pre-measured length. But when accounting The weight of the microwave should be compared with the material from which the wall is made to which it will be attached. For example, when fixing the microwave on a concrete wall, there are no problems and it is allowed to use less durable fasteners than when installed on the wall made of plasterboard. But, first, it is recommended to read the instructions or the technical parameters of the fastener, in which, necessarily Points maximum weight of the devicewhich the He is able to withstand. Preferably choose fastener with a small margin of 0.5 —1 kg.
Due to pay due attention such elements as Clamps. They are calculated to prevent a random drop in the furnace. Most modern fastening Elements them are equipped.
The latter, but quite an important selection parameter reliable And good fasteners are the attractiveness of the appearance. Though fastening element nT Pr.aktich nevotumen In the kitchen, nevertheless, manufacturers offer a large selection of these parts, in a ratio with different colors and textures.
Most often they are plastic or steel. A variant of the combination of these materials is possible, which fits well into any interior style.
How to hang a microwave on the wall: Procedure
The microwave is attached to the wall in two ways. Her fix directly on the surface of the wall or embedded in the kitchen cabinet in which it also borrow Little space and can function normally.
The installation procedure begins with choosing an element to which Fastening will be made. Most often it looks like two metal or plastic parallel friend Friend support units on which fixation occurs.
A variant of the installation of supports on the beam is possible for a stronger mounting and maintenance of a microwave oven with a lot of weight.
To select the fastening type, you should compare the weight of the microwave with the technical parameters of the fastener to which it is installed.
For installation work, the presence of a drill or a perforator is required, with which the holes are drilled under dowel. But, before that, it is recommended to perform measurements of the product itself and the wall to which it will be installed. Draw a pencil to the preliminary installation place to attach the microwave smoothly and efficiently.
Install the dowel to the base that is drilled under it. When attaching a plastic dowel, use your hands if it is metallic, it will be necessary to have special equipment in the form of a pistol for dowels. Further Place the part in the form of a bracket for the microwave on the wall and score it with nails. Check the connection strength.
In the event of fear that this fastener It is not able to withstand the weight of the microwave oven, it is better to replace nails using anchor bolts.
If you plan to install a microwave in the design of a kitchen cabinet, then you will need to buy a special frame that can fasten her in the closet. To save on the purchase frame, make her Alone, using metallic corners cooked or enchanting Bolts with each other. Color design in the color ratio. Secure her On the wall surface with dowels or anchor bolts, as in the first version.
Kroneshte. w oni am microwave do it yourself
1. The first embodiment of the shelf for the microwave on the wall implies the use of purchased materials in the form of a furniture shield of the desired color and size. For example, with a standard width of a 60 cm cabinet, the lower shelf is equipped with three Parties. For provision An additional space on which the microwave furnace will be installed. Among the shortcomings of this kind of designs should be noted:
- lack of ventilation, which leads to a strong overheating of both the device and the top of the cabinet;
- oversized shelves eliminates the possibility of any kind of kitchen work under it, thus, the kitchen disappears yet one certain part of the usable area .
2. The second embodiment is to set the microwave oven on a shelf for TVs. Their acquisition will not be difficult, and the installation work is carried out very quickly.
3. most optimal one microwave fastening protrudes installation and preliminary structure-standing shelf. among the advantages of this select the type of installation:
- mobility and independence from the shelves of kitchen furniture;
- the presence of adequate ventilation;
- multifunctionality, without the need for arrangement on the shelf of the microwave oven, it is sufficient her used as a conventional piece of furniture .
In order to make their own this view of the shelf will need to have:
- three standard furniture boards, dimensions 45h60 cm, it is better to give preference to the material pre-treated;
- bars, they are sold in furniture stores, Diam mp pcangas 2.2 cm and a length of 2 2 M.One piece will be enough;
- flange connectors for bars — sixteen pieces, choose a product, fabricated entirely of metal;
- corners for wall-mounted fasteners .
As toolsTo help build a shelf for a microwave oven, prepare:
- electric drill;
- roulette;
- marker;
- drill .
Standard microwave has a size 50s41h30, will focus on these figures. If microwave larger or smaller, it is necessary to adjust the size of the shelves.
In areas denoting horizontal plane mark the point at which will be mounting flange connections: 3x3 cm from each corner. For an average shelf drilled holes having a diameter of 2.2 cm. this is Rod opening will be established. However, it is necessary to pre-attach the flanges. To do this, use the self-tapping screws. For fixing the rod on the surface of the shield, use a clamping screw, which should be turned to the wall, in order to avoid spoiling the appearance of the shelf.
For shelf correct form from the main pole to cut four equal portion sizes ranging from 60 to 70 cm. The shelf assembly rod set sufficient to shield and connect all other parts.
Stand for microwave on a wall: at the manufacturer's instructions
For the manufacture of this type of delivery will need to have:
- wooden furniture shield;
- electrolovka;
- grinding machine;
- drills and self-tapping screws with dowels;
- screwdriver;
- impregnation or varnish with a brush for applying them .
All the necessary elements are quite accessible, in addition, a furniture replacement option is possible. shield on shield from Chipboard or MDF.
We offer to make a shelf with such dimensions:
- length - 60 cm;
- width - 30 cm;
- height - 30 cm;
- depth - 25 cm .
To resolve the parts on the workpiece, the use of an electroll q. Marking will require a ruler with one * straight angle, pencil and roulette. Carefully rectify to the markup of parts, as not too flat lines or angles, capable of significantly worsening the appearance of the design.
When all the workpieces are cut, start it to be skiing using a grinding machine of a ribbon or vibration type. With absence of this Tool, you should apply the usual sandpaper shallow fraction paper.
The final stage is the assembly of the entire design. To do this, use wood and dowel screws. Before starting screwing the screws, pre-drill holes under dowel. This The procedure will help prevent tree cracking during operation. After assembling all the details, behind the design secure Special fasteningWith which it will be fixed on the wall.
Further The shelf needs to be painted or opened with varnish. If the second option is selected, then varnish need to apply at least three layers because shelf It is in the kitchen, and is constantly exposed to steam and moisture. If necessary, the shelf is simply stained with special paint designed to work with wooden surfaces. After drying, hang the shelf on the wall and install the microwave. Consider when choosing a place setting the shelf, you should pay attention to ondifferent sockets or opportunities in her Installation.
[yframe. uRL=‘http://www.youtube.com/watch?v\u003dgwinaalrefm.‘]
