Nowadays, the range of building materials allows you to create a wide variety of buildings and elements of the interior. At the same time, do not forget about the safety of building structures, as this is the main parameter applied to most structures. To improve the reliability and durability of buildings, a masonry mesh is often used. This is a relatively recent reception, significantly increasing the life of the erected structures. Also, the metal grid is useful in cases where the brick has not the highest quality.
Content
During long years, the metal grid is used to create concrete fences. It is due to the metal material, such structures do not crack and do not fall apart with small damage. The principle of applying a metal grid when the brick house is erected is about the same. Low-quality brick will begin to collapse in a few years. To prevent this, people cover the surfaces of the walls with cement or facing. Obviously, these are serious financial spending, and after some time the low-quality building material will again give itself to know.
Metal grid production for bricks
Interestingly, the brick mesh is made by small enterprises that are at their disposal a small machine. This equipment is used exclusively for the contact welding of metal elements. In production, a small diameter wire is used - 3-5 mm. You can also find a mesh of low carbon wire, the diameter of which is not more than 6 mm.
The cost of production of the metal grid for brick is relatively low. In large-budget construction projects, this product is applied almost always.
When buying it is worth paying attention to the fact that it is best to make a choice in favor of a reinforced mesh, which is not much more expensive. At the same time, the reinforced material is not terrible heavy loads that may occur during the operation of the home.
Application of metal mesh for bricks
Despite the fact that the metal mesh is most often used during brick masonry, this material can also be used in other cases. Within the dwelling, the metal product is used when laying tiled floors or walls. After such events, the tile will be securely held for long years, even if the cement mortar had not the highest quality.
When building buildings, the metal grid is used to strengthen the foundation. In addition, this product is an ideal option for reinforcing concrete.
From this we can conclude that the metal grid is used where the concrete is used, cement mixture or other building material in need of strengthening. Most often we are talking about the use of the grid in the process of erection of large buildings and other massive structures.
You can also meet the reinforcement grid. The large diameter of the metal base allows you to use this product in the construction of multi-storey houses and other buildings that need high reliability. In some cases, especially when the foundations are erected, several layers of such reinforcement grids are used. As a result, the design retains its initial properties for tens of years.
Using a metal mesh for bricks
During brickwork, the metal mesh can be used in a variety of cases. Most often, this material is put between brick laying levels. In order for the structure to be highly durable, a cement mortar layer must completely hide the grid. The material itself should be used in such a way that the metal wire does not stick out of the layer of frozen solution. It later could lead to crack formation, and then no construction work can help return the desired strength of the erected wall.
In addition, it is necessary to ensure that the grid is smooth. Any curvature after a while can cause deformation of the masonry layer. If after purchasing the grid turned out to be a little curve, you can use a hammer or pliers to align the problem areas of products.
The thinner the metal grid, it is more susceptible to the corrosion process. Obviously, it is better to purchase products that are already covered with an anti-corrosion layer. For the price it is not very different from the usual grid. If this is simply not available on sale, you can apply an anti-corrosion layer on a conventional grid. To date, there are many anti-corrosion mixtures in construction stores. You can apply them on the grid with a brush. In this process, you need to show maximum attentiveness, since the places where there will be no protective coating, rust can be covered soon.
When using the grid, it is important to pay attention to the sizes of cells. The most popular now are the following dimensions: 50x50, 100x100, 150x150, as well as 200х200 mm. Obviously, the material with the smallest cells ensures the highest strength of the construction erected. The grid with large cells is best used in cases where the walls of the dwellings have a greater thickness. Also, the large-sized mesh is used to create concrete surfaces and foundations.
When buying a masonry grid, it is important to familiarize yourself with the manufacturer's documentation. High-quality grid, at a minimum, must correspond to GOST 23279 85, or more modern standards. Only in this case the confidence appears in the fact that the construction structure will last for many years. Sometimes the manufacturers can add completely new compounds into the protective coating of the grid, which in the best way to influence the durability of the structure. Before such purchases, it is best to get acquainted with the reviews about the manufacturer.
