The fungus on the surface of the ceiling is a serious problem in the home. Many people are trying to get rid of this trouble in their ways, however, the situation only worsens. Of course, ideally, you need to get rid of the fungus immediately when his first traces on the wall appeared. Unfortunately, few people pay attention to various molds, which is just beginning to develop. The propagation of these unicellular organisms occurs very quickly, so every day the situation will only aggravate. Unfortunately, the fungus can appear almost everywhere, so very often it is found in those places that are constantly beyond the boundaries of a person.

The main features of the situation

Attention should be paid to the fact that especially often the fungus appears in rooms where relative humidity is significantly increased. If we are talking about humidity, which is 95%, then in such a room there will be a large amount of fungus, and the residents themselves will feel discomfort.

There are other causes of the appearance of the fungus.

1. Very often, the fungus on the ceiling appears in those rooms that regularly flood from above. Water enters the cracks between the bathroom and the wall, and waterproofing can very rarely save the situation. It will be a very long time to dry after such a trouble.
2. Also a serious cause of the fungus may be risers of heating and water supply. Steel pipes of these elements can drive significantly. Accordingly, moisture spreads quite rapidly.
3. Often, problems of this kind arise because of an outdated sewage system, which begins to proceed and create an adverse atmosphere in the room. Therefore, it is worth regularly monitor the integrity of all installations and pipes.
4. Condensate is also a serious problem and the cause of the appearance of the fungus on the ceiling. Similar phenomena are found in cases where in a steel pipe water is much colder than the surrounding air. The moisture will condensate, and drain the remains to the floor.
5. Often the fungus appears due to freezing walls. This case can be called widespread for the reason that many people have a rather low temperature in the winter in the winter.
6. The fungus can also be formed on ceilings due to non -working or not effective ventilation. Checking ventilation performance is very simple. It is enough to light a match and bring to the ventilation opening. If the flame shook a little, and then went out - everything is fine with ventilation. In other cases, it is necessary to carry out certain measures aimed at resuming ventilation performance.

We can also talk about the obvious causes of the appearance of the fungus. It can even be wet spots. If the main ceiling is hidden behind the stretch coating, you should get rid of the fungus as quickly as possible if it is present. Otherwise, microorganisms will negatively affect the health of the residents of the house, as well as the integrity of building structures.

Prevention of the appearance of the fungus

Nowadays, there are a large amount of funds, the use of which guarantees the absence of fungus and other microorganisms in the future. First of all, it is worth noting the antiseptic primer. Regular treatment with such means of walls and ceilings will forget about the fungus in the foreseeable future. The best solution will be the use of antiseptic primers during construction measures. It is especially important to use such a primer in cases where it is planned to install stretch and suspended ceilings. The cost of such antiseptics is at a low level, so this remedy for the fungus on the ceiling is the most optimal.

Removing the fungus

If the fungus has already appeared on the surface of the ceiling, you will have to use completely different products.

1. First of all, we will need to remove all the plaster and whitewashing, which is affected by the fungus. Only the floor slabs should remain. Previously, you can wet the ceiling, and after a couple of minutes the entire plaster will be removed as simple as possible.
2. If an exfoliating plaster is present on the same ceiling, it is also worth getting rid of it.
3. Now we will again have to return to the antiseptic primer. Apply it to the surface of the ceiling with a brush. It is important not to miss a single affected area. We will need to climb into every recess and scratch, otherwise soon the fungus will begin to form again.
4. After the antiseptic primer has dried up, it's time to apply a bitumen primer to the ceiling surface. It is also a primer, however, it will help strengthen the previous layer and make a layer of plaster durable.
5. With the help of acrylic putty, we need to close all the protrusions and recesses. After everything has dried, you can start painting the surface.
6. However, it is also worth noting that the solution will be ideal to polish the surface of the wall. This will reduce the appearance of the fungus to a minimum.
7. If you have a stretch ceiling at home, you can limit yourself to an antiseptic primer.

If you are not interested in such a long and costly way to solve the problem, you can limit yourself to the purchase of whiteness. This is a tool that perfectly opposes the fungus, and even costs inexpensively. Sodium hypochloride is based on whiteness - a caustic substance that can easily resist bacteria. This tool can be treated with the affected area, after which the fungus will disappear. However, it should be understood that the substance is quite dangerous to human health, so all operations with whiteness should be carried out in rubber gloves and glasses. Unfortunately, this tool protects the surface from the fungus for a short time. After a few weeks, it will be necessary to apply whiteness to the ceiling again.

From this, we can conclude that only a full range of actions described above can help get rid of the fungus for a long time. Otherwise, we sacrifice the presentable appearance of the home. It is also necessary to seriously analyze the situation and find the source of the appearance of the fungus, it depends on whether the fungus will appear in the future.