Modern window structures are a means of protecting the room from heat loss and pollution, they provide reliable sound insulation and a comfortable microclimate.
Content
The most fragile window element is a double -glazed window. It is subject to mechanical and physical damage, a consequence of which it is necessary to replace or repair glass. In order to carry out work, it is not always required to call a specialist, you just need to know how to take out a double -glazed window .
Cases of dismantling of a double -glazed window
As a rule, a number of significant motifs precede to take a double -glazed window from a window frame. Consider the main ones:
- Broken glass is the most good reason why it is necessary to remove and replace the damaged glass canvas.
- The freezing or fogging of the window is a sign that the double -glazed window has lost its tightness and needs to be repaired or replaced.
- A decrease in soundproofing characteristics, which attracts discomfort of people living in the room.
The trace of how you identify the basis for replacing the previous design, it is necessary to choose a new product based on the type, thickness of glasses, their coating and quantity. However, the primary task is to extract double -glazed windows. This process, despite its visible simplicity, still has a number of its intricacies, which should be considered separately.
Replacement of the double -glazed window in a plastic frame
The predominant majority of consumers are chosen by a plastic double -glazed window, the dismantling of which has its own characteristics. Such a window has high strength, wear resistance, provides convenience in operation and maintenance, as well as ease of care. But when disassembling such a design, the main attention is paid to the removal of the double -glazed window.
Preparation for dismantling
During the initial examination of the damaged window, as a rule, an opinion arises that it is quite difficult to disassemble a metal -plastic window from a technical point of view. However, there is a proven and simple method that should not be abused so as not to damage the mechanisms.
You should adhere to the requirements and rules for work with the seizure of glass, to carry out each stage in strict sequence. In addition, it is necessary to use special fasteners, tools and equipment to avoid unpleasant consequences. So, to remove the double -glazed window, you will need to prepare the following:
- tires of rubber;
- axe;
- protective gloves;
- spatula;
- screwdrivers in the set;
- knife.
Preliminary disassembly of the window
Before removing the double -glazed window, the design of the metal -plastic window should be disassembled, performing actions as carefully and carefully as possible. The sequence of work is as follows:
- Initially, it is necessary to remove a special fixing rod from the upper loops of the window.
- Then take it out of the opening. At the same time, observe extreme caution, since the design of the double -glazed window has a small weight and is not quite convenient for holding your hand. It is better to attract another assistant or to prepare special captures, the use of which will not allow the fall of the transom, damage to glass or sash.
- Remove the removed plastic frame slowly and carefully lower it to the floor and lean it to the wall.
- Then proceed to the dismantling of accessories from the window sash. To do this, turn out the fixing meters and unscrew the locking mechanism.
- The window handle must only be removed using a special screwdriver, which coincides in the cross section with the fastening of the element.
Important! In order to put the new double -glazed window as freely as possible in place of the extracted structure, it is recommended to fold all the accessories in series as it is used. This will save each element, without the risk of loss, and also visually indicate the return path for the installation of a new product in a window frame.
The process of seizure of the double -glazed window
After the preparatory work and disassembling the window structure, you can proceed to the dismantling of the double -glazed window. The sequence of actions is as follows:
- Initially, it is necessary to prepare a knife or an ax - not too sharp, but not dull to ensure penetration into a narrow gap.
- Then put the tool to the double -glazed window between the fixing stack and frame along the vertical seam. Actions must be performed with extreme accuracy so as not to leave chips and scratches on the glass canvas upon completion of work.
- It is necessary to press immediately to the entire length of the blade so that it can get to the right place and push the stacking staff at least 1 mm.
- Slowly turning the hilt, take the window stack from the sash. Conduct a similar action with the entire frame.
- In the trail behind this, moving along the glass plane with your hands, remove the fastener element. At the same time, do not pull it on yourself.
- Similarly, repeat the process with the lower horizontal strap.
- Then proceed to the dismantling of a vertical stack, and after it the upper horizontal. It is undesirable to change this sequence, since glass can fall out before necessary and damage.
- Then gently pick up the upper edge of the glass canvas and slightly tilt it to yourself.
- Now you can extract glass, holding it with both hands on vertical ribs.
- Gently, carefully put a double -glazed window without a frame to the wall.
Recommendations To the process:
- for uniformly pushing the structure, it is advisable to use household brushes or simple towels;
- to remove the double -glazed window without much difficulty, you should smoothly press on the canvas from the outside, slightly overturning it on yourself;
- the place where the seized double -glazed window will need to be prepared in advance - lay a dense cardboard sheet or bedspread on the floor.
Replacement of a double -glazed window in a wooden frame
Woodl -glazed windows in wooden frames have their own installation features, implying the presence of an additional silicone layer under the glazing. Therefore, taking out the structure, you will have to cut off the sealant, holding the double -glazed window from possible loss.
Important! Samuing themselves, as a rule, are made of wood, like the entire window frame. They are fixed through special studs, which are quite difficult to extract without a specialized tool. For this reason, dismantling work must be done extremely carefully so as not to damage the elements.
For high -quality dismantling and replacing the double -glazed window in a wooden frame, it is necessary to prepare the following tools:
- pneumatic pistol for pouring sealant;
- spatulas;
- a spitter -binker with the necessary bend of the studs themselves;
- gloves;
- compressor.
The process of extracting a double -glazed window from a wooden window structure occurs in the following sequence:
- Initially, it is necessary to remove the glazing taps using special plastic blades. Actions should be performed carefully so as not to damage the paintwork of the frame.
- Remove the protective layer of sealant using a construction knife.
- Slightly pressing on the upper edge of the glass, take it out, overturning it. It is advisable to use vacuum suction cups in order to avoid glass loss from the hands.
- Carefully clean the grooves and frame from various pollution and the old silicone layer.
- Carefully check the structure for mechanical damage or the appearance of moldy fungus. As necessary, carry out restoration work, lay out chips and cracks.
- The junction of the double -glazed window must be treated with a new layer of silicone on the outside of the window.
Management with the rules regarding the dismantling of the double -glazed window is presented on the video clip:
