A hydromassage bath has long ceased to be a luxury item and increasingly becomes a mandatory attribute of each house. Due to the growth of demand and competition within the segment, prices for such products are falling, and therefore choose the hydromassage bath becomes easier. Since devices are manufactured in a wide variety of forms, modifications and colors, you should navigate in key parameters that will allow you to buy a functional and ergonomic product.
Content
Types of hydromassage products
Depending on this criterion, two types of products can be distinguished:
- ordinary baths;
- combined.
Normal type Has high popularity. This type of product is distinguished by the fact that the hydromassage function is provided by air-water jets. At the same time, nozzles are located on the side of the bath itself.
Combined bath It has a somewhat different massage system. The influx of jets occurs both in the form of air-water and air-bubble streams at the same time. For this, aero and hydromassage nozzles are provided in products. In terms of comfort, combined products are significantly superior to ordinary.
Choice of manufacturing material
Modern bathtubs with hydromassage can occur in such versions:
- acrylic;
- plastic;
- fiberglass;
- cast iron.
Consider the detailed features of each of the types of material so that when choosing to navigate the key advantages and disadvantages of products.
Plastic hydromassage baths
The simplest version of the manufacture is plastic products. Consider the main benefits:
- such material looks quite aesthetically;
- manufacturers offer a wide range of goods;
- the ability to choose forms and color to make the most combined with the interior of the bathroom;
- the bath with hydromassage is significantly different from the analogs.
However, this product has a number of flaws:
- small service life;
- the material is easily aware of the negative effects of rigid water, salts and temperature differences;
- low stability in mechanical damage;
- it is poorly cleaning, eliminating scratches or plaque.
Fiberglass products
This type is somewhat less common than just plastic baths, but have a number of such advantages:
- low weight of hydromassage products;
- wide design variability;
- easy repair and maintenance;
- longer service life than in plastic products;
- relative cheapness.
Along with this, mention some disadvantages Fiberglass Baths:
- the appearance of dullness over time;
- low stability in physical, mechanical and chemical influences;
- if irregular operation, the case is easy to break.
Cast iron hydromassage baths
The most rare acquisition option is a cast-iron bath with hydromassage. However, the relevance of such products is dictated by several weighty Advantages, such as:
- durability;
- high strength of the product;
- long preservation of heat;
- aesthetics and exclusivity;
- easy to care.
At the same time cast iron baths with hydromassage have some limitations in use. Among the mains can be allocated as:
- high weight of the product;
- difficulties in installing and disassembly;
- high cost of material;
- small set of functional elements;
- relatively small selection of additional options;
- difficulties in delivery.
Acrylic bathtubs with hydromassage
This kind of product now most in demand among consumers. Manufacturers offer a wide range of products in a variety of forms, colors and conditions set. Consider key features acrylic baths with whirlpool:
- ease of care and cleaning;
- high hygiene - in the structure of the material does not accumulate dirt, germs and microorganisms;
- good maintainability - any crack or scratch can be easily eliminated in the home;
- material for a long time keeps the external aesthetics, does not fade and does not lose luster;
- light weight products;
- high resistance to UV and infrared radiation;
- long service life;
- large variability models.
In spite of the impressive feature list, in acrylic baths have whirlpool a number of flaws. Consider the most important of them:
- low resistance to high temperatures;
- carcass insufficient strength;
- susceptibility to chemical material care agents;
- the relatively high cost.
Selection of technical components
Variety of massage treatments in the bath and their characteristics determine the technical components that are provided with each product. Let us consider in more detail on what points should be emphasized when choosing a spa.
nozzles
This element is a device that provides spraying air and water flows. Modern manufacturers equip their products nozzles of two types - brass and polymer. When choosing a bath should pay attention to the following features:
- The optimum number of elements should be at least 6, otherwise the water will boil over.
- Preferably the presence of micro-nozzles, which can provide aeromassazhnye function.
- The water pressure in the system must be at least 2 bar.
- For ease of cleaning and hygiene, give preference to the injectors, which are mounted in the surface of the product, and not attached to the outside walls.
- It is advisable to choose a bath, which has adjustable elements with automatic closing.
bath frame
Before you buy a hot tub, should pay attention to the frame of the product. The main features that are necessary to take into account the following:
- give preference to products in which there are reinforcing the foundation around the perimeter, since it ensures an even distribution of the weight to the bottom;
- strength of the assembly depends on the presence of carrier-metal carcass;
- better if the corner spa bath will have a few points of support.
whirlpool function
Depending on the functionality of the bath may provide a therapeutic effect of swimming. In this case, the main components of the actions are such:
- range of massage modes;
- providing state of weightlessness;
- relaxation effect under a thermal water.
Nanos in products
Selection washcoat mechanism determined by the number of nozzles. Thus it is necessary to pay attention to a number of features:
- sedimentation give preference made of a special polymer with aluminum flashing parts;
- engine power should be at least 600 W, preferably in the range 700-1500 W;
- engine runs silently quality products;
- select a measure of performance drifts over 200 liters / min;
- installation element dampers must be used;
- the best option - installing auxiliary compressor allowing include turbo mode.
Operating modes hot tub
bath with whirlpool dignity consists in massage functions. Underwater currents involve special elements - the injectors, which can be adjusted to work independently using the remote control. Many manufacturers of luxury products in this segment offers a comprehensive range of whirlpool treatments. Consider the main ones:
- Imitation waterfall, which is implemented by a special crane. Such an arrangement provides a stream of water according to the cascade principle.
- Traditional massage, the effect of which allows you to direct the jet on the acupuncture points of the body. This may change the water pressure force that the regulatory regime - a vibrating, pulse, traveling wave, and so forth.
- Oriental massage - mode simulation pressing the strong fingers of the masseur.
- The effect of spiral rain or whirlpool.
- Mode air hydromassage, a beneficial effect on the skin and bloodstream of the body.
Choose from depending on design
The most extensive variety of shapes and configurations are performance acrylic bathtubs. When selecting products, you may encounter such variations whirlpools:
- Oval product that can be placed in the center of the room or near the wall.
- Rectangular baths - ideal for installation in small spaces.
- Corner products that fit harmoniously into any room design and take up little space.
- Round tubs are designed for installation in the central part of the room.
- Products non-standard shapes or chamfered corner.
Thus, the main aspects and product requirements are listed, which should be armed when choosing a bath with hydromassage. You can read product reviews on the manufacturer's website and pick up the optimal and multifunctional attribute of the bathroom will be much easier.
Recommendations on how to choose an acrylic bath, are presented on a fragment:
