How to care for interroom and entrance doors

Interior doors - a mandatory attribute of the furniture interior of the housing, which is present absolutely in any house. They perform a number of important functions and need careful use. Observing the main rules for the care of doors , You can extend the life of their operation and maintain the initial view of the new subject.

Lacquer

Caring for interroom doors , having a polyester coating need regular inspection, which will allow to identify damage, scratches and other defects. Since such products are often represented in the economy segment, their quality is not always at the highest level and you should carefully care for the doors. However, this process is fairly simple, and you can quickly return the initial view with the help of lacquer and impregnation.

Consider the basic rules of care for doors:

1. Since this type of interior is made of a material that passes a special drying, during the period between buying and installing the door it is necessary to store it in the room. This will allow acclimatization.

2. Avoid the formation of excess dry dryness and heat in the room to prevent the cloth cracking.

3. It is preferable - not to remove polyethylene until the moment of installation, as well as to save the product away from the heating systems. This will avoid the unpleasant consequences of sudden drops of temperature and humidity - cracking, deformation, bloating, and pr. Curvas.

4. Install the lacquer doors are needed in the last turn, after completion of all repair work. Since the impact of moisture is destructive for them.

5. If the door leaf is covered with toned varnish, it is necessary to avoid direct sunlight on it - this can cause uneven fading of the surface.

6. To maintain aesthetic appearance, every 6 months need to carry out deep cleaning. For this it is worth producing such manipulations:

• wipe the surface of the canvas with wet matter;
• dry wipe the entire door with a towel;
• apply a solution of alcohol or a specialized agent on the product a 10% product.

7. With periodicity 1 time in 2 months it is necessary to handle the doors with a polyrolol, which contains paraffin or natural wax. Such measures will allow creating a thin protective layer that protects the product from moisture exposure.

Purchasing wax, emulsifier, silicone antistatics or other doors care products , pay attention to the type of surface for which they are intended. The composition of high-quality solutions should not contain coarse chemical additives.

Among the most famous trademarks producing furniture care products can be distinguished as:

• Emsal;
• Chirton;
• Pronto;
• Oricont Luxus;
• TATRACHEMA;
• Mebelux;
• Fabulous furniture.

Solid array doors

Caring for wooden doors is especially a scrupulous process, since such products are manufactured on technological equipment, have a high cost and display the status of the owner of the housing. The most common materials for the production are: beech, alder, oak, pine, ash. Products made of solid wood massif have a long service life, but they need to carefully care for them.

The main requirements for the content and care of wooden doors:

1. Processing the product can be ordinary tools intended for furniture. If the cloth is made of pine - it is permissible to use a weak soap solution, since the material is poorly susceptible to moisture. However, it is worth protecting the cloth from mechanical impact and damage.

Important! The use of acetone containing solutions, as well as cleaning powders is not allowed.

2. When carrying out repair work, it is recommended to remove the doors with loops or cover them with a polyethylene film. The protective coating should not be gaps or holes.

3. When operating the product, it is necessary to avoid increasing humidity and temperature indoors, as these are the main enemies of the natural tree.

4. It is necessary to wipe the door with a special solution with a special solution containing 15% alcohol and 85% of water at least 1 time in 3 months. After wet wiping, it is necessary to wipe the product dry.

5. It is not recommended to use such doors care products. , which contain abrasive powders. This is fraught with a worsening of the appearance of the wood fabric and its functional characteristics.

6. If scratches appeared during use on the door, they can be quickly eliminated. To do this, you will need to do the following:

• wipe with wet matter damaged plot;
• soft pressure, handle scratching space with sandpaper with fine fraction;
• thin layer apply polishing wax to the stripped plot;
• remove surplus dry matter.

It is also recommended to inspect the door fittings at least 1 time in 2 years. To do this, you will need to make such manipulations:

• remove the door cloth;
• adjust and clean the loops, guides and fasteners;
• lubricate all fragments with semi-liquid lubricant or oil;
• hang the door to the loop and test fittings.

Veneered doors

Interior veneered doors - sufficiently common structures that are famous for reliable performance, long service life and good quality manufacturing. Care for veneered doors will not just extend their performance, but also to simplify and make them comfortably use.

It is quite simple to care for veneered interroom doors. To do this, you should adhere to several recommendations:

1. It is very important to observe the timeliness of the inspection of the canvas and door fittings. Products from such a category are difficult to restore, so it is better to avoid damage.
2. The greatest attention deserves lacquer, which is covered with a veneer surface. It helps protect wood from deformation, damage and atmospheric influences, and also gives the product aesthetic appearance. Therefore, it is impossible to allow abrasion of the lacquer surface on the door.
3. It is necessary to clean the cloth from pollution and dust at least 1 time per month, using special tools for processing the furniture surface for this. Such a polyrolol gently eliminates all the particles and covers the web with a protective film that prevents moisture penetration. In addition, the projection layer has dust-repellent properties.
4. It is advisable to use the care products with natural beeswax. This will protect the surface of the door from the negative impact of sunlight and give the canvas a noble gloss.
5. No less often than 1 time per year, inspection and cleaning of fittings should be performed. After that it needs to be handled with lubricant.
6. If the door spontaneously changes the position from closed to open, it is necessary to remove it and adjust the fittings. If you do not fulfill it on time, unpleasant consequences may appear in the form of wires of the canvas and its damage.
7. It is not recommended to place the heating devices near the door, not to expose the product with high temperature or moisture.

Often, when washing floors, the lower edge of the veneered door also falls under water, which entails negative consequences. In order to avoid damage to the product, it is necessary to process this part of the door with a double layer of polyteroli and wax specifically designed for the furniture surface. This will allow you to preserve the web in a suitable state for many years of use.

You can learn about the features and differences between the types of interroom doors below:

Glass doors

Sliding interroom structures with glass fragments or solid glass doors are quite fragile and elegant interior items. They have a pronounced aesthetic appeal, being an object of attention in any interior. For this reason, it is necessary to carefully care for their condition and gently exploit.

Maintain a glass door in proper condition. This will require follow these recommendations:

1. Wipe the glass tightly needed as it is contaminated, but at least 1 time in 2 weeks. To do this, only use a cotton cloth.
2. As the detergent is necessary to use solutions having a neutral or weakly alkaline medium. Acceptable to use a weak solution of shampoo.
3. Not recommended to use detergents with abrasive powders.
4. Vulgar recipe can be used by rubbing a glass surface with mild soap or vinegar ammonia asleep.
5. Do not apply for cleaning coarse or brushes.

Outcome

Caring for interroom doors regardless of their type and surface features is an important component of product content. Simple manipulations and regular cleaning will avoid serious problems and damage damage, as well as expensive repair or restoration.

Important! The obligatory requirement is to prohibit the use of the following materials when causing outside the doors with any type of surface:

1. Scrapers or sponges having plastic or coarse metal surfaces.
2. Processing the surface of the canvas with means that are not intended specifically for cleaning the furniture surface.
3. Apply detergents that contain in the composition of oil, abrasives, alkali or acid.

Interior door leaf care guide can be seen on the video: