How to make shutters on the windows

Shutters on the windows in the country house perform several useful functions. Decorative beautiful flaps give the house of original flavor and perform protective functions. The windows are one of the most vulnerable places in the house. The presence of them is significantly complicated by the task of illegal penetration into the premises. Made from boards or metal of shutters, are equipped with not only outer attachments or mortise locks, but also internal pin locking elements.

By installing shutters on the windows, the room will receive additional protection from cold and atmospheric influence. Shutters prevent snow sticking, pouring during the rain and the occurrence of drafts. In addition to protection from cold and protective functions - shutters on windows, can be an excellent decorative element and home decoration. On how to make shutters on the windows, and their advantages will look at this article.

Wooden shutters on the windows

Shutters wooden on the windows, there are internal and external. According to the structure - shield or scribble, single or duplex. Make wooden shutters with your own hands forces to any owner.

Materials and tools for the manufacture of wooden staven

In order to make shutters on the windows of wooden, you will need a boards with a thickness of 20 mm and width from 10 to 20 cm. It is better to choose massive veneered boards from the wood of wood, but you can also purchase a smooth fugu. It will take a woodworking tool: tree hacksaw, plans, drill, chisel, screwdriver, etc.

1. The measuring instrument is a carcinet, roulette and level.
2. Consumables: self-tapping screws, loops, metal corners and locking elements (locks, drowsy, studs, etc.).
3. Olife, paint, brushes and antiseptic, for the final phase of work.

Wooden manufacturing process on windows

Simple shrews and studs

1. First of all, it is necessary to perform measurements of the window opening on docks and platbands. Create a plan scheme and cut the boards.
2. For the mechanical connection of the prepared boards for the stable is made. The smooth fugu is usually seated with glue and additionally strengthen the overlapping rack.
3. The pinned locking of the cloth is much better and easier. To do this, choose in the end of the groove board, and from the opposite side of the spike. You can purchase a ready-made spubbed board. Such boards are used for flooring.
4. The cohesive canvas is strengthened by transverse overhead tie and bias. Such elements are suitable for simple, performing utilitarian functions. Threaded strips are used for hidden stocking shields.
5. In this case, in the end sidewalls of the boards, the holes are drilled by a thin drill. Then drill to the diameter of the threaded stud. The boards are bandaged on long studs and tightened by bolts. The ends of the boards, thickly misses the joinery glue to seal the possible cracks.

Pilented wooden shutters

1. Pilenka is a thin board inserted into the frame frame. Such shutters combine beauty and durability. Finished panels and profiled timber with a groove electoral groove can be purchased in a construction store or order in a joinery workshop.
2. Pilenki can be smooth or decorated, with layouts of a tongue bar or with selected kalevkov, fig-headed, floated and with frame-decorated thread.
3. Bruks strapping - performing the role of a tightening frame with 5 mm thicker than chickens. Tempered and polished bars are connected by single or double spikes with eyelets.
4. The fililers, wrapped with glue, are inserted into the collected frame, and the sash are fixed on the plane until complete drying.
5. The chisel on the sidewalls of the Wooden Staven and on the windows of the windows, the landing nests under the loop are hosted. Cutting and mounted locking elements and shutters can be mounted on slopes. The exhibited in the level of the sash is to sit in looping nests and are attached to screws.
6. The final stage is a wooden coating by an impregnation of preventing rotting, oil and after drying the painting or an autopsy varnish. Various options depicting shutters on the windows are in the photo.

Shutters on metal windows

1. For those who care more about security, it would be logical to install metal shutters on the windows. Such steel sash can be ordered in the workshop for the manufacture of armored doors. Depending on the complexity, area and thickness of steel for the windows, the price ranges from 200 to 250 cu.
2. Make shutters on the windows yourself - it is possible, but if you are not a professional in cold metal processing and not a welder, then you will have simple and durable metal sash. Metal decorative shutters on the windows, decorated with wrought elements better to order in the workshop.

The procedure for making metal stans

1. In order to make iron shutters on the windows, you will need a corner 50, it will go to the magnifier, the steel sheet in the size of the window opening 2 - 3 mm thick. For the reinforcement of the canvas and give the ribs of stiffness, you can use a chamberler, a square of a square section or a corner. The main requirement is the rigidity of the rigidity should not be for the outlines.
2. An important point in the manufacture of metal staven on the windows is the correct measurements of the window opening. Each vertical and horizontal side of the slopes and the windowsill are measured separately, the corners and diagonals are uniform.
3. The contour frame is welded from the metal corner. Obligated steel sheet mounted on a frame. This is usually done with welding, and the weld passes from the wrong side, but in the absence of a welding machine, perform a connection with the help of screws for the metal. The step for them should be no more than 5 cm, and the adjoits are sealed with silicone waterproof and frost-resistant sealant.
4. Depending on the configuration of the window opening and the stiff ribs are made. It is envisaged both horizontal and cross-shaped ribs from a metal profile.
5. On the vertical planes of the frame, the openings for the loops are worn. The loops on metal shutters are fixed by self-drawing or small bolts. On the side of the slopes, the mount is made by anchors.

If you wish or technical need, you can install shutters on the internal windows. They are made in the same way as outer, only installed from the inside.