How to make a bathroom mat with your own hands

A bathroom rug is a rather noticeable and functional design element. Having set a goal, put an exclusive and convenient item in the bathroom, you should take into account some features of the bathroom rugs.

Remember that in this part of the apartment there is always high humidity. That is, all the things that “live” here must resist the effects of excess moisture. In addition, in the bathroom, often slippery from spilled water, so the bathroom mat should be on a rubber base or, at worst, on suction cups, in order to avoid injuries.

Classification of the bathroom mat offered by the buyer in shopping centers

From natural materials

These rugs look often very spectacular, but their cost is quite high.

• Textile
• Cork
• From bamboo
• From the vine
• From palm fibers

From synthetic materials

Such mini-rips for the bathroom, for the most part, are represented by the same type of products, the samples of which differ, in fact, only color and shape. Of the pluses - cheapness, of the minuses - artificiality.

• Silicone
• Rubber
• Plastic

Everything, as always: you want environmentally friendly and pleasant material - pay more. If you want to pay less, be satisfied with synthetics. Although, there is a way out of such a situation: make a bathroom mat with your own hands from what is in the house.

What bathroom mats can you make with your own hands from available materials?

1. Rugs of old knitwear (terry rug, fabric bag mat, wicker rug).
2. Rug from sea stones.
3. Rug from the cork.
4. A rug of plastic covers.
5. Fetire rug.

We make a rug in a bathroom from old knitwear clothing

T -shirts, knitted shorts, turtlenecks, pajamas and much more are used. The disadvantage of such a rug is that it gets wet. There is only one way out - make several such copies. While one of the rugs will be dried, it will be replaced by the other.

Terry rug

What will be needed for manufacture?

• Dense fabric-base.
• Old clothes.
• Sewing machine.
• Scissors.
• Threads.

The sequence of actions

1. With the help of scissors, harvest strips from old things with a width of 2-3 cm and a length of 10-12 cm.
2. Take the strip by both edges and stretch, while receiving a kind of tube.
3. Cut out a rectangle of the desired size from one-toleeper. Consider the need for allowances from all sides of 1.5-2 cm.
4. On one side of the rug, lay the strips-pipe in rows and sew exactly in their middle.
5. Put a new strip from rows of tubes, sweeping away from the previous strip.
6. Shoot again, as last time.
7. Fill in, having done similar operations, all the base.
8. Bend the edges of the tissue inward and stitch along the perimeter of the rug.

If you make rugs in the bathroom for children, it is appropriate to use bright things of different colors, alternating them with stripes. Such a "rainbow" will not leave indifferent a single baby.

Tissue bag

What will be needed for manufacture?

• Rubber rug for the base.
• The base fabric (any strong fabric, burlap is also suitable).
• Old things of different colors (choose bright fabrics).
• Scissors.
• Threads.
• Sewing needle.
• Glue, resistant to moisture, for rubber.

The sequence of actions

1. Cut from the strong part of the old things using scissors, squares of different sizes.
2. Use tissue scraps as a filler. To do this, cut the remains into small strips.
3. Take one of the squares, put the filler in its middle and connect all the free edges.
4. Using a thread, fix the edge of the resulting bag as you tie, usually a balloon.
5. Repeat this with each square, making many bags.
6. Cut out a rectangle from the tissue with a rubber rug of + 1.5-2cm from the dimensions of the allowances from the dimensions.
7. Sew, in turn, all the bags to the fabric base, alternating different in color. Fill the entire surface.
8. Wrap the edges-tolerants and stitch.
9. Light with glue a rubber rug.
10. Glue a fabric base to it.

We make an original wicker bathroom rug

What will be needed for manufacture?

• Old things of different colors.
• Ribbons, fringe and other decor elements.
• Scissors.
• Threads.
• Sewing needle.

The sequence of actions

1. From old things, cut a lot of stripes of different colors.
2. Weave braids from them or twist loose flagella.
3. PROTEME ALLEMENELLEN THE ISELLED AND LIKS.
4. Turn each pigtail and burn in a spiral, forming a lot of round blanks.
5. Fix them with threads, decorating with ribbons, fringe, etc.

We make a massage rug of sea stones

Imitation of the sea coast with the help of pebbles in its own bathroom is a great idea in the world of everyday fuss and unrest. The pebbles brought from a summer trip will be caused each time.

What will be needed for manufacture?

• Rubber-base rug.
• Glue, such as "liquid nails".
• Spensive liquid.
• Sea stones.

The sequence of actions

1. Degrease the surface of the base, as well as stones washed and dried pre -dried (alcohol, gasoline, acetone, etc.).
2. Apply a little glue to a small part of the base.
3. Light glue the first pebble.
4. Stick half a minute and press the stone to the surface.
5. Do the same with the rest of the pebbles, laying them close to each other.
6. From different colors and shape of stones, lay out the pattern.
7. Let the glue dry completely.

We make a bathroom mat from plugs from wine bottles

This refers to traffic jams from wine bottles that remain after family celebrations and various parties. By connecting to the process of collecting traffic jams and relatives, very soon you will receive the required amount of such an environmentally friendly, and, most importantly, gift material.

What will be needed for manufacture?

• Wine traffic jams (the same size).
• Knife and board.
• Rubber-base rug.
• Silicone glue.
• Spensive liquid.

The sequence of actions

1. On the board, by wielding a knife, cut all the plugs along.
2. Degrease all surfaces.
3. Smate with glue part of the surface of the rubber rug.
4. Process with glue cut of one half of the cork and glue it on the base. They can be glued in a horizontal direction, or in vertical, or diagonally, or chess. It is important that the halves of traffic jams fit tightly to each other.
5. Repeat until the whole base is sealed.

We make a massage bath for a bathroom made of plastic lids

A very economical, but pretty option with a massage effect. But, such a rug, of course, is "for an amateur."

What will be needed for manufacture?

• Lids from plastic bottles of different colors.
• Silicone glue and degeneration liquid.
• Rubber-base rug.

The sequence of actions

1. Degrease the rubber surface and top of the lids.
2. Process the surface of the base with glue.
3. Glue the lids with the bottoms down to the rubber rug, laying out multi -colored patterns.

We make a felt bathroom

Fetr is an excellent material that gives a feeling of comfort and warmth. In addition, when working with felt, nothing will stop the flight of your imagination. A fashionable bright solution in the form of an application will give your bathroom a highlight.

What will be needed for manufacture?

• Fetire fabric of different colors, the brighter, the better.
• Scissors.
• Threads.
• Pins.

The sequence of actions

1. From the fabric of the same color, cut the base of the rug.
2. Manually sweep the edge of the base.
3. From felt pieces of other shades, cut objects for the future application.
4. Lay the figures based on and attach them with pins.
5. Sew the application to the base with rough stitches.

Well, here, we hope that the ideas of creating a bathroom mat offered by us will be enough, and you will find among them something acceptable for you.