To date, vinyl wallpapers have gained impressive popularity. In some countries of the world, they simply displaced many other popular types of wallpapers. There is no doubt that the vinyl material has a number of positive features. This type of wallpaper is much more resistant to scratches than known analogues. Also vinyl material has a chic appearance. You can find tens of diverse drawings that will not be equal to the patterns on classic wallpapers. In fact, sticking the vinyl material is a fairly simple process, but you need to know some of its features, without which the optimal result will not succeed.

Features of vinyl wallpaper

It is necessary to know that the vinyl material is quite specific. When wetting, such wallpaper is essentially stretched, and in the process of drying, the vinyl begins to severely narrow. Thus, it is necessary to intently control the process of sticking wallpaper so that the strip of material is ultimately a single decorative component of the room.

It is also necessary to seriously approach the choice of the coloring of the material. Many people know that it is most often possible to meet precisely bright and bright color compositions. Obviously, such options are not always suitable for a certain room interior.

The main aspects of the preparatory work

Before the start punches of vinyl wallpaper Need to take care of a number of important points. Without them, the main process can go completely differently as planned.

At the very beginning, the acquired wallpapers are checked for defects. Unfortunately, with such a nuisance, buyers face very often. In some stores, sellers simply want to get rid of defective rolls. Even the differences in color compositions between the roll rolls can be considered a marriage. It is possible that differences in color are simply different compositions, but in this case there will be different names on rolls and ciffers.

After unpacking, you need to learn all the icons and mark on the liner with information. It should be borne in mind that on all rolls the information should coincide. Also on the liners will be marked howexactly glue vinyl wallpaperspecific brand, whether the match is necessary when sticking. It is worth noting that to simplify the process of sticking it is better to use wallpaper that do not need to dock. In this case, you do not need to pick up the drawing to get a full-fledged composition.

Often, people acquire 2 different types of wallpaper so that when sticking to alternate with different stripes. With a successful selection of the material at the end, a really decent composition is obtained.

The liner must also contain information on the preparation of the walls of the walls. In some cases, there are special requirements, without complying with the not quite expected result.

Before sticking itself, it is desirable to measure everything correctly, so as not to cut separate pieces of wallpaper during the wall decoration process.

For plating wallpaper, a wallpaper spatula is useful, with which you can easily smooth out all the irregularities and bubbles. It is worth saying that during the process itself, you will need to use the wallpaper spatula several times, since the air under the material can penetrate for about two hours until the wallpaper dry out.

It is important to understand that the room should be dry and warm, otherwise the wallpaper can be deformed when drying. Also during the main process it is impossible to allow strong temperature differences. Thus, it is necessary to control the optimal temperature, considering that a strong cold and heat will spoil the vinyl material.

In addition, before the process of sticking wallpaper, all electrical equipment must be turned off. If you decide to remove all the outlets, you need to use the shield and turn off the electricity throughout the apartment.

The main process of sticking vinyl wallpaper

Begins the process of sticking vinyl wallpaper From the corner of the room and is performed with the allen on the adjacent wall (up to 5 mm). After that, the nibble can be removed by the stationery knife. If sticking occurs, it is necessary to start working from the angle, otherwise the desired result can not be achieved.

If you need to punish the ceiling wallpaper, you need to start the process from the windows side. This procedure also implies work together, as it is too difficult to cope with the tasks set. The first person is engaged in smooting one part of the material, and the second holds the rest of the material with the help of a mop.

So that the wallpaper was glued qualitatively, it is necessary to take care of the uniform applying of glue. To do this, it should be put under the edges of the material sheets of unnecessary paper. This will allow you to boldly apply glue in any volumes. If for some reason some corners of wallpapers are numb, you should only unscrew the small part of the material and re-apply glue.

The glue is uniformly applied throughout the perimeter of the strip. After that you need to fold the wallpaper twice. One third of the top of the strip is bent until the middle, just like the bottom. Within a few minutes, the material must lie in this form. This will allow the wallpaper thoroughly impregnate with glue.

Next, wallpapers are unfolded and applied to the wall. With the help of the wallpaper, the entire strip is smoothed, from the middle to the edges. Traces of glue are removed using a wet sponge. In order to get rid of excess wallpapers on the joints, you can use a metal ruler and a stationery knife. It should be careful not to cut the desired part of the material.

In the event that the borders are needed, you need to purchase special glue. If vinyl wallpapers Reliefs, the borders cannot be laid on them, so during the blending of the wallpaper it is necessary to create a small indent.

In the event that after smoothing, one lane of the wallpaper went to another, you should once again smooth the strip, applying efforts to the side opposite to the defect. With a high probability of joints between stripes will be perfect. After drying the glue wallpaper will be a little already.