How to paint garden furniture

Arrangement of the household territory garden furniture is an important step in design design. The most popular materials for interior items are wood and chipboard. Despite the functionality and comfort of such products, with outer operation, they are exposed to precipitation and ultraviolet. Therefore, it is important to protect the structures by staining.

Darking of garden furniture made of wood

Wood is an optimal option for the production of country furniture. Natural, elegant and aesthetic material allows you to create a real decoration of the house area and serve a good service. However, in order to prevent possible drying, rotting and deforming products, it is necessary to adhere to careful care. So, for sure to know how to paint wood furniture , it is important to comply with the following recommendations.

• Step 1: Pre-processing of the product.

Before starting work, disassemble garden furniture in detail. At the same time, thoroughly check the condition of each fastener and replace the broken screws with new ones.

• Step 2.: Grinding work.

Using a grinder or coarse sandpaper, carefully polish the surface of wooden furniture products. Then remove the dust resulting dry matter.

• Step 3.: Polishing and cleaning metal.

Before you paint the furniture, you need to eliminate all possible defects, contamination on metal structures. Use a wire brush that quickly removes stubborn paint and rust.

• Step 4.: Application of impregnation.

If the product is made of wood a new and previously subjected to painting, it is necessary to thoroughly soak deep penetrating emulsion. This tool helps protect the surface from the effects of temperature, weather conditions and the formation of mildew.

Among the most well-known manufacturers of antiseptic primers can be distinguished brands such as:

• Alpina Holzgrund;
• HELIOS BORITEX;
• PINOTEX IMPRA;
• TIKKURILA SUPI;
• KOLORIT;
• SENEZH;
• Neomid.

Important! After applying the impregnation air bubbles may remain. To remove them, you need to re-paint the surface of the primer, carefully clearing the place of formation of bubbles in front of the secondary opening.

Also keep in mind that dirt paint can change color when applying the first layer, because it is deeply absorbed in a layer of wood. This helps to reliably protect the product from exposure to direct sunshine and moisture.

• step 5: Staining surface.

Before you begin the process and choose which paint to paint furniture , should make sure that the surface of furniture products has dried enough and does not have contaminants.

Then thoroughly mix the paint and quickly apply a thin layer of content on wooden products. It is recommended to carry out the work spray, but in his absence you can handle with a soft brush.

Among the manufacturers of painting materials for wood such popular company:

• Tikkurila;
• Düfa;
• PINOTEX;
• Kolorit;
• Acqui;
• tex;
• Zebra.

• step 6: Application of the second layer.

Before cover wooden article a second layer of paint, it must be sanded with sandpaper in the fiber direction. After you take off the dust with dry cloth, cover the surface a second time.

Important! It is best to spray the work in the summer, when the air temperature is 10-35 ° C. This will avoid unpleasant consequences in the form of absorption or nedosyhaniya paint on wood.

• step 7: Staining of metal parts.

To paint the furniture with his own hands is not just beautiful, but also practical and keep the effect for a long time, should be treated and hardware components. Paint ADLER VariColor most suitable for this purpose because it has a high rate of protection against corrosion and material damage.

• step 8: Installation of a colored product.

After the furniture item is completely dry, proceed to assemble it. It is advisable to use new fastening components.

Painting wicker furniture

Garden rattan furniture has a distinct aesthetic appeal, so it is often used for interior decoration suburban area. Despite the convenience, low weight and elegance, rattan furniture is subject to delamination and deformation under the influence of the sun and moisture. Painting wicker furniture is easy due to the fact that the oily substances lie exactly, well absorbed and suitable for use to any non-professional master.

The most common brand of paint manufacturer - is:

• Tikkurila;
• Düfa;
• MA-15;
• DOMUS;
• OTTO.

dyeing technology is no different complexity. To do this, use the following instructions:

1. Prepare Substrate: Clean layers of old paint, remove stains and using sandpaper strip the scratches.
2. Cover the bottom product primer or impregnated wood. This will allow the paint quickly "grab" and hold out long enough.
3. After drying, apply a thin layer of paint. At the same time, pay attention to all the details and indentations.
4. Wait until the product is completely dry wicker. It usually takes up to 3 days.
5. With the help of a fine-grained sandpaper eliminate all the bumps, stains and flaws.
6. Cover product on a thin layer of clear lacquer.

Important!If you can not paint rattan furniture, you can apply a liquid wax. To do this, it needs to be applied to the cleaned surface and allow to dry. This will also protect the product from contamination, but not for long.

Staining furniture made of particleboard

One of the most common materials of manufacture of garden furniture today is a particleboard. This feed is compressed natural wood chips that are glued together in a dense layer by formaldehyde resin. However, under external influences, particle board may deform and become unstuck, so it is necessary to cover the paint material to protect it. In addition, the garden furniture in the photo design projects , made of extruded material, after painting becomes decorative effect.

Features painting products from chipboard

Coloring of garden furniture made of pressed material allows you to give products an extraordinary style, as well as enhance moisture protection properties and resistance to ultraviolet rays. After the literate application of paint on the chipboard, the furniture does not just get an updated look, but also increases the service life. In addition, the protective layer of paints and varnishes reduces the harmful effect on human health during the operation of furniture. Since the resins contained in the wood will not be able to evaporate under the cover of varnish.

Preparing for the painting process

For neat and reliable staining of furniture from chipboard, it is necessary to carefully prepare the surface of the product. This is the key to the successful outcome of the operation. And in order to remove fragments of old paint, you can use such methods:

• Thermal - this method involves removing forged paints by exposure to steam. For such a process, you will need a construction hairdryer, dry matter and a spatula that can be removed from the surface of the softened paint layers. In order not to apply the DSP damage to adhere to the recommended temperature regime.
• Chemical - this option implies surface treatment by chemical composition. Special bow should be selected based on the type of old paint on the furniture subject. And in order to avoid unpleasant consequences, it is important to clearly observe the instructions prescribed on the packaging.

Before painting furniture from chipboard, it must be seized and covered with putty to eliminate small defects. It is also recommended to cover the surface of the product with primer before applying acrylic composition. This will create an additional protective barrier against cracking and drying.

Furniture coloring technology

1. Clean the surface of the furniture subject from pollution, fat and dust.
2. By means of sandpaper, polish the furniture item so that minor scratches are formed - it will improve the clutch of the material and primer.
3. Apply a primer emulsion, it is preferable to use acrylic tools.
4. After drying up with a brush or roller, apply a layer of paint. To give color saturation, you can open the surface several times.
5. When the paint is completely dry, polish the product again.
6. Apply the final layer of colorful material.

Tips for painting chipboard

1. Products made from this material before painting should be processed so that the adhesive composition cannot evaporate toxic substances, and the surface did not absorb moisture. To do this, it is necessary to apply a special impregnation, deeply penetrating the inside of the pressed sheet.
2. If you decide to lacquer on the chipboard, it is also desirable to open the top layer with a similar impregnation.
3. In order to achieve the absolute smoothness of the upper layer of the product, use the short-circuit roller when coloring.
4. To emphasize the texture pattern of the material, its surface must be treated with a patination or alkyd paint.
5. If the painted furniture has a dark color, then it is worth covering it with two layers of the primed emulsion. Otherwise, its shade will be shifted through light paint.

Detailed information about methods, tools and materials Painting of wooden products can be seen on the fragment: