How to separate the walls with artificial facing stone with their own hands

A variety of finishing materials often creates major problems associated with the need to choose. People who are not best oriented among construction resources cannot definitely say whether a specific product will be a good choice. An even more serious situation is the appearance of the material. When the owners plan to finish the walls or other surfaces, they are sent to the appropriate store to buy the desired volume of material. And there they are waiting for hundreds of types of tiles, and almost all of them may look quite well. Accordingly, it will be extremely difficult to make the only correct choice, while considering the price constituent component and some other parameters.

This article will talk about the use of artificial stone for wall decoration. In almost every construction store, there is a lot, so the choice is difficult to do. Fortunately, there are some useful recommendations that allow you to make a choice in favor of an excellent option, and not regret it later.

In this material, we will look at the main features of artificial facing stone, as well as analyze the main stages in the process of decoration of the walls, so that even the newcomer can cope with the tasks set. It is worth recognizing that the process is truly difficult, but the knowledge of some subtleties of the technology allows you to spend the process quickly, and without unnecessary problems.

How to separate the walls with artificial facing stone. Modern Artificial Facing Stones

Everyone knows that in our days the range of products for wall decoration is more than large. Almost every manufacturer who is engaged in building materials, produces its product options based on certain materials. Of course, everyone is trying to make their material most attractive and original outwardly, and it is often happening.

As for the direct assortment of this product, then, of course, in many buyers, the eyes really scatter, looking at that very tremendous volume of finishing materials. However, it must be remembered that in modern conditions to make the right choice somewhat easier than years earlier. The bottom line is that on the Internet you can always find interior options using certain variations of the material. Therefore, after such a small analysis, you can safely go to the store and acquire the necessary resource. Of course, everything is not always so simple as it may seem at first glance, however, the large range of finishing materials allows you to create just such an original design that the owners want. Modern technologies allow you to produce inexpensive, but at the same time high-quality and attractive externally materials. Thus, in some cases, the budget of large-scale repairs may not be so large. Artificial stone is an inexpensive and high-quality solution that is massively used during repair work.

How to separate the walls with artificial facing stone. Natural stone against artificial

Quite often on the Internet you can meet articles in which natural materials and artificial materials are compared. It is obvious that it is unambiguous to say which option for repair is the best or worst - it is impossible, since situations and decisions can be the most diverse. Thus, it makes sense to consider the main advantages and disadvantages of natural and artificial stone.

Features of natural stone for wall decoration:

• The most important thing is that natural stone is a durable and attractive externally material. For hundreds of years, it is able to remain in the initial state even with harsh environments. Old fences or other structures created on the basis of natural stone are often in excellent condition.
• High price is exactly what you need to pay for a quality product. The bottom line is that the mining of a stone is a laborious process that requires many efforts, therefore the price tags for this product are appropriate. Of course, it is possible to find products with cheaper, but much depends directly from the dimensions of the material. The more stone it is more expensive.
• The negative side of the stone is its large weight. Practice shows that transportation of this material is often a difficult task, so most often you have to hire large specialized transport, especially if the repair is large-scale.
• A variety of stone species is an important advantage. It should be borne in mind that the stone can have one or another color, thanks to which the original style of space is created. Often it is precisely because of the color of the price tag may be significantly higher, so this aspect is also worth paying attention to.
• The complexity in the use of natural stones is that it is not always easy to implement some single style based on this resource. The thing is that the stones have different sizes, and it is quite difficult to choose the very unit of material for a specific project. The greater the stone - the more problems. Of course, for these masters, such problems does not exist at all, as you can always get out. If there are large volumes of stone available, then choose the most suitable for the parameters of the unit of the material will not be difficult.

Features of artificial facing stone:

• The most important advantage of this product is not too high price. It is safe to say that today this product is found in huge volumes, so almost all owners can afford to acquire this resource. It should be noted that there are both larger price tags, and vice versa, so the choice is often based on the financial capabilities of the owners.
• The appearance of an artificial stone is definitely attractive. Often, this material is manufactured in the appropriate forms, so no one has any doubts that this product is an artificial stone. From this, there is another advantage associated with the practicality of the material use, as the stones are perfectly combined with each other.
• A small weight allows you to attach a facing stone on sufficiently small volumes of binder material. Accordingly, this is another aspect associated with cash savings. Again, and transportation, which often plays an important role, can be made by its own.
• The durability of the artificial stone is often due to the question. The problem is that the material is produced on the basis of components that are not able to provide the very reliability that is available in natural stone. However, if the conditions in which there is a facing stone, quite acceptable, then many years of service are provided.

Facing with artificial stone surfaces

As we have already spoken, on the Internet, you can find hundreds of options for design on the basis of artificial stone. Practice shows that this is actually the best option to find optimal solutions for design space. People who do not have experience in such events can start experimenting over the design, but ultimately it may be far from what was expected.

People with experience often spend peculiar experiments related to the design of facing stone. The bottom line is that they often do not create everything from scratch, and try to remake a few existing design projects. This is most likely, and is the most optimal option for any housing.

Immediately after all activities were carried out related to the preparation of the designer project, it is necessary to put a wall that will be finished.

How to separate the walls with artificial facing stone. Preparation of the Wall

The most important thing is that you need to know about the preparation of the surface, so this is what the wall should be perfectly smooth. Any deviations can extremely negatively affect the overall condition of the already equipped surface.

Experts advise to carry out shuttering walls. It is recommended to use a reinforcing grid that will significantly strengthen the wall surface.

It is worth paying attention to the fact that it is used to fasten the artificial stone either tile glue or liquid nails. In some cases, it makes sense to use cement-sandy solution. Obviously, the involvement of one or another material should be justified, and often it makes sense to take advantage that go along with the purchased stone. Also useful can be recommendations of specialists who are definitely present in various points of sales. In most cases, a specific grade of glue can be found to a specific material, due to which the surface will be distinguished by reliability and durability over long years.

When a dry mixture is used, the material falls asleep into water, mixing with a construction mixer. If everything is done correctly, it turns out a thick homogeneous product.

Separately, it is necessary to note the situation associated with the use of plasterboard as a base for facing stone. You should again pay attention to the documentation that goes along with the finishing material. In certain cases it makes sense to use a special toothed roller, when using which can be significantly improved adhesion.

How to separate the walls with artificial facing stone. Preparation of the surface

To begin with, it is worth paying attention to the fact that before the main works it is necessary to prepare the surface. Often this may be extremely responsible tasks, since the overall quality of surfaces depends on this.

At the same stage, it is necessary to take care that at least a small sketch be created, which allows it to be clear enough to imagine what the surface will be in the future. Accordingly, the plan will resolutely approach repair activities, and get the most expected result.

After the sketch was created on paper, it can be safely transferred to the surface that will be repaired.

Most often, the above measures are carried out extremely simple, as everything is limited to a fit of the size of the material to a specific surface. The thing is that the artificial stone has a fixed size, which allows you to get an unequivocally attractive surface.

Well, the main task in the preparation plan for the main process is to clean the surface from various contaminants. In addition, it will definitely be useful and getting rid of various flaws. In the first case, there is nothing complicated, since everything is limited to enough banal actions, and the cracks and other places will have to pay a lot of time. Sometimes, if flaws have too large scale, you have to use the cement-sandy mixture to get rid of all this. Often, such tasks can take a lot of strength, but without proper preparation, it will not be possible to obtain a qualitative result of finishing work. If there are small deviations, then it is possible, with the help of a facing material, it can be easily hidden.

The process of cladding walls with artificial stone

• Application of the solution on the surface occurs with the help of a cell or a special spatula with a comb.
• Experts note that the most responsible stage of works related to the facing of the surface is based on the laying of the first row of the material. The mixture is applied to the width of the first row - no more.
• It is recommended to lay the stuff material, which allows you to be confident in the high quality of the final result.
• To create high-quality seams that make it possible to realize a truly attractive externity surface, it is necessary to arma with plastic crosses for conventional tiles. Often this is quite enough to get excellent masonry. After the repair process, the cross can be removed, and the surface will uniquely delight with its appearance.
• To slightly improve the visual effect associated with the facing of the surface, you need to slightly shift each new row of stones. However, it is necessary to do it carefully, since too strong mixing, or uneven displacement, can negatively affect the overall perception of the style of space.

The mixture should be applied in small portions, since the surplus is extremely often creating problems associated with the strength of fixing the units of the material. In addition, the situation associated with the preparation of blends for facing stone is equally important. Manufacturers indicate that on average, the binding material is frozen for 40-50 minutes, therefore, the process should be carried out as quickly as possible, or to be limited to small work sections to be confident in the high quality of the events.

Separately, I would like to say about the use of grout, which should be tightly located along the seams of the lined surface. It is important to note that it is often this, at first glance, a slight component of the repair process, it can significantly affect the appearance of the wall. Accordingly, after applying the grout, the rubber tool should be used, which can be used without free to get rid of excess material. All this is held in the shortest possible time, as the grout will also dry, too, and until this very moment of drying, you need to have time to remove the extra parts of the material that can not create a completely attractive surface style.

An unambiguously positive idea can be combined by various materials so that the style of housing, or external surfaces, turned out to be attractive outwardly. Most often, the owners, if they decided to use artificial stone, simply choose resources that differ exclusively with color color. However, even in such situations it should be verified that the colors among themselves are harmonized, and the overall dwelling design will be quite acceptable. From this and should be repeated primarily to get a beautiful and reliable stone surface.

How to separate the walls with artificial facing stone. Other details

It should always be borne in mind that during the repair process, a special such, which is related to wall decoration, various difficulties may occur. Often they concern directly technologies of the process, so it is ultimately not the most expected result - simpler simple. As we said, an artificial stone can be made on the basis of various materials, and this can significantly affect the technology of surface cladding. For example, if the material has a large weight, it will have to use a binding material that can cope with the loads. In addition, the situation may concern and directly errors allowed during the fixation of a separate unit of material. In this case, you should stop the event as soon as possible and work on solving the problem. Unfortunately, various errors associated with wall decoration can create an unprofitable situation in which certain volumes of stone or binding material will have to arrive. Again, if the process is stopped on time, then there should be no problems.

It is especially responsible to refer to the process when the scale of work is really large, and various failures can significantly affect the appearance of the room in general.