The last decade of plastic panels, which are crushed by the walls of the housing, became incredibly popular. This happens first of all because the cost of such products is relatively low, and the appearance of the room can be made completely diverse. In addition, the cover of PVC walls is a fairly simple process. At the same time, such work should take into account quite a few details that should pay attention to everyone to decorate their house with such material.

Features of plastic material

Some time ago, it was popular that plastic negatively affects human health, especially if it is used in the dwelling. It is worth noting that today there are practically no such problems. Manufacturers have modern technologies that allow you to get rid of toxicity. Despite this, too cheap PVC panels for walls may have a sharp smell and other unpleasant features - such a product should be avoided by the party.

One of the main advantages of such products can be considered a variety of external component. In most building stores, plastic panels have hundreds of options forms and graphic design.

Seamless style of materials allows you to use them in residential buildings without any problems. Pictures and patterns on panels can be perfectly combined with other elements of the interior. Now you can often meet manufacturers who do without any problems to cover exactly the drawing that you need. Despite this, the prices for such PVC panels for walls will not differ much from the value of classical product options. The appearance of the panels is limited only by the fantasy of the owner, so this product can be safely considered universal.

The disadvantage of most finishing materials can be considered the fact that with their help it is very difficult to separate hard-to-reach places. These zones include different protrusions, transitions, angles. PVC sheet panels for walls have the simplest structure that allows installation even in the most difficult cases. It is very easy to cut the material, and if necessary, you can replace one fragment to another, and at any time.

Many people remember that the first plastic panels were rather fragile. Even small loads could seriously damage the material. Now the situation has changed. Special technology for the production of such a coating allows it to withstand a lot of weight. Often the hosts are fixed in the panel massive paintings, as well as other decor elements. The fixation of any subjects is carried out by classical technology - with the help of brackets and other fasteners.

Those who use plastic panels in their home know that this material is wonderfully combined with other elements of the house. Plastic sockets, ventilation grids and many other dwellings look great with a similar coating. Metal premises attributes are well combined with this universal material.

Modern technological solutions allow plastic to serve several decades, without losing their initial properties. Interestingly, the fact that the PVC panels easily carry low temperatures, so they can be sewn on the balcony without unnecessary problems.

Controversial points relating to plastic panels

Many owners mistakenly believe that plastic elements are suitable for any surface. However, it is important to understand that to create smooth walls it is necessary to spend some work. Not quite a high-quality dorett can be a serious problem, after coating the wall with plastic, it will look a little convex, and it is impossible to allow. Specialists advise to use the level to prevent even the slightest irregularities. The structure of most panels will immediately display the shortcomings of the surface. The plaster may also be a source of problems, but unlike the crate, correct the plaster will be much more complicated and longer.

Despite the fact that the process of applying plaster is simple enough, the newbie with many tasks may not cope. To do this, you just need to know certain subtleties that will help simplify some processes and set the panels so that they look at well and served as long as possible.

Negative sides of PVC

Almost every building material has certain negative sides. The walls of the PVC panels can also turn into some problems. First of all, it is necessary to know that plastic is nonhygienic. It is for this reason that this material practically does not finish children's rooms and premises in medical institutions. Also plastic polarizes reflected light.

In order for the use of the coating to no one hurt, it should be regularly cleaning. This is done extremely simple. It is necessary only a rag and a solution for washing. It is especially important to pay attention to the panel with massive seams, since they are strongly polluted, if not regular cleaning. Seamless coatings clean extremely easy. It is very important to install fragments so that emptiness has not been formed - they become an attractive housing for insects. At the same time, the material sealing is also not a good solution. After some time, the panel and the lamp can be significantly deformed and come into disrepair.

The fire prevention properties of plastic is also, to put it mildly, not the best. Of course, it will notice that it will be quite difficult, but it should be understood that in the event of a fire panels will be a serious source of fire, which will also be distinguished by dangerous gases. Obviously, with such a situation, it is not the best idea with this scenario. It is not particularly necessary to install PVC panels in the kitchen, because there is a source of fire.

Installing PVC panels

The overall ease of installation of panels and is one of the main features of the material. A large fastening regiment joins the crate with a bracket or self-tapping screws. On the other hand, the material is a small fastener regiment, which hangs over the crate. There are many profiles to help fix fragments. The most popular are classic corners, without them to spend the entire volume of work will not work. Plinths are also important profiles that need to be secured at the bottom of the panels - at the floor level. Most of the area that plastic is separated, you need to equip the starting and finish profiles. They do not have to have the same color as the panels, the main thing is that all the elements are well combined.

Tools required for wall decoration plastic

1. To fit the sizes of individual elements, we need to use the electrolovka. This tool perfectly sees any part of the panels, leaving no damage and burrs. Sparely used and disk saw. In large-scale work, it is even preferable.
2. The construction stapler will be needed if plastic fragments are attached to wood crate.
3. Under the use of the electrolybiz, a stub is useful, which will help securely secure the tool for cutting panels.
4. The need for a plastering spatula is that during the process it was easy to flex a part of the finish profile. Often, in this case other tools are used, however, the spatula will provide maximum convenience.
5. Rubber cizyanka will help to easily pull the panels to the place. You will not be able to make it with your hands quite reliably, because there will be likely to pull out the main profile.

Plastic Panel Installation Process

As mentioned earlier, the installation of plastic panels is a fairly simple process, but it includes a lot of actions that should be remembered.

1. At the beginning of work it will be necessary to make a crate to which the panels will be fastened.
2. After that, it is necessary to install profiles: guide, starting and finishing.
3. The first sheet of the panel is installed in the bottom profile, then fuse the arc and make the installation in the upper profile.
4. With the help of the image, the tight mounting of the sheet is made towards the starting profile.
5. Next, the rest of the plastic fragments are also fixed in addition to the latter. When the queue of the remaining element comes, it is necessary to be especially attentive. This panel will need to trim from the side of a large mounting shelf. A small supply should be made to an extension, which often happens during the warm seasons of the year.
6. Flexing the finish profile panel, the lower part of the last element is set. It is necessary to make it so that it entered the profile tight. To do this, you will need at least two people. First, part of the finish profile is given, and then the panel starts up to the top corner. At the end, you will need to bend the shelves of the mounting and finishing profiles and finally fasten the plastic fragment.
7. Next, we need to consolidate the panel and the finishing profile to the crate with the help of a construction stapler.
8. After the main part of the work, plinths will be equipped.

Features of creating cruise

Many believe that there is no particular need for a crate, but it is worth saying that with the help of this element, in the future it will be possible to quickly replace the plastic panels and produce their reliable fastening.

Make a crate of wood bars, less often - from a metal profile. Small cells that are behind it can be used to apply insulating materials. To the surface of the wall, the crate is fixed with self-drawers in dowels or clamps.

Quite often you can meet the use of such an element on the ceiling. This greatly simplifies the process of fixing plastic or metal profiles, as well as the creation of lighting. The fasteners of the crate must be installed in a step to half a meter. The distance between the bars should be so that the coating of the insulating material is as simple as possible.

Other aspects of the process of placing the PVC panels

Definitely, the walls of the PVC panels are an excellent option that will help save a lot of money and transform the dwelling. Also, this product is incredibly practical, in contrast to tiles, decorative stone and many other materials.

PVC panel prices for walls are the most diverse, however, you can always find an optimal option that would satisfy in quality and cost. In any case, the main feature of this product is considered a huge selection of options, which no other finishing material has.