During any repair work, it is necessary to deal with many problems, which are not so easy to resolve. It is especially serious about finishing work. Very often there are places that are not amenable to the usual ways to finish, so you have to invent something unusual. There are quite a few tips that will easily help you easily cope with all existing problems associated with the Arch pasting.

Important peculiarities of the process

It is very important to understand that many owners set the task to puncture the arch from the plasterboard with wallpaper so that they are perfectly fitting them in the drawing. Make it very difficult, however, there are simple exits from this serious situation. Many are advised to simply select a wallpaper for the arch in such a way that they are missing the basis of the drawing or patterns, but there remained a necessary color. In this case, the arch will look even better, since the absence of patterns will emphasize the attention of people at the facility. This applies to those cases when basic wallpapers have many bright graphic elements. There is also a good option - just choose wallpapers that have another coloring. Definitely, it is important to choose exactly those wallpapers that will be combined with the main. Also, they should not have lines and other elements that will negatively affect the overall look of the room.

Quite often there is a situation where the arches occurs quite slowly, so the glue, applied to the wallpaper, can dry on one end of the material. Often, people prefer to finish them quickly faster, and it turns out that the wallpaper is not exactly exactly. To avoid such troubles, you can use a small brush and in the process of applying glue to wallpaper.

It is also worth clearly understood that the lack of wallpaper on the arch may look much more and harmonious.

Process of pasting Arch by wallpaper

Before placing the arch with wallpaper, you need to spend all the necessary work around it. Next occurs the process of arrangement of the wall on the sides of the opening. The strips should be cut so that the inner surface of the arch accounted for about 3 cm wallpaper. It should also make cuts on this part of the material, which will greatly alleviate the pressed wallpaper to the wall surface.

Next, you should cut 2 cloth wallpaper so that their width is half astimeter more arches width. Definitely it is worth carefully close to cutting the cloth, because even if the material turns out to be a couple of millimeters shorter than necessary, it can significantly affect the appearance of the room.

The salary begins from the bottom of the arch, but continues until the arch. It is in the area of \u200b\u200bthe arch "wallpaper must be glued to braid. If the wallpaper has a pattern, you should be as attentive as possible so that the image coincides. With simple wallpaper there should be no problems.

Also a serious problem during wallpaper paste is the presence on the walls of sockets and switches. There is nothing complicated here. It is enough just to turn off the electricity in the home, which is the most important condition, and then the rosettes are weakened and, if necessary, all this can be removed and shove wallpaper. After that, it is necessary to make the appropriate cutout around the socket, which will easily help install the outer part of the power source. If we are talking about wires that are often conducted along the perimeters of the walls, they should be carried out in the area of \u200b\u200bthe Plintos. In another case, the wires can significantly complicate the process of woven wallpaper, especially in the case of arches. To know how to enclose the arch if there are wires and sockets, you can also consult from specialists.

Secondary features of pasting wallpaper Arches

It is quite often happening that the arch has an unusual form that does not allow them to be caught by the wallpaper. Often, in order to avoid problems, in such situations simply do not apply the wallpaper, because it is much easier to cover the wall with the Wall or some finishing material. Indeed, it looks pretty good, especially when the perfectly smooth surface of the arched opening is reached.

With an unusual form of the arch, it is necessary to do the following:

• cut the cloth, which, approximately, will cover half the inner surface of the arch;
• we leave 3 cm wallpapers on the sides, as under the usual method of adhesive;
• after the first cloth was glued, it is necessary to cut the second. If you measure the necessary length is very difficult, it is better to cut a cloth a slightly longer on the eye;
• we apply a cloth to the necessary part of the arch and cut off the excess part of the material;
• we are applied glue to the cloth and glue, as in the classic method - the mustache.

Arch Arch

To envelop the arch arch, we need to cut the wallpaper, the width of which must fully match the width of the arch. In this case, it should be slightly increased. The need for such actions is that in this way the full match can be achieved if it is present. We glue the stripes to the sum and thoroughly stroke. The presence of bubbles and irregularities is unacceptable. It is also important that every corner of wallpaper is pressed and coincided with other parts of the material. Otherwise, the wallpaper will be gradually disconnected and lose their solid appearance.

Other features of arches

If the arch has racks that also need to be saved, the situation should be seriously analyzed. Most often, racks are wood materials or elements of a gymnastone. In these cases, there is no need for pasting. Maximum that can be done is to cover in red or whitewash. Also, racks, if present, often have a certain relief, so it is categorically not recommended to glue the wallpaper on such a surface. After a short time, the material will begin to flap, and then again will have to think about the other coating.

Many experts recommend using wallpaper, which have nothing to do with the main wallpapers, which are covered with walls to cover the arches. However, it is important to choose exactly such a material that will be gorgeous to combine with other housing elements. Often, people prefer to simply cover the elements of the arch whit. Due to this, all the attention of everyone is facing the perfect form of arched design.

Quite often, the arch is glued to the corner. It is also a chic way that creates a good appearance of the arch design, and also focuses on its angular elements. It is important to choose a corner that has dark tones if the wallpaper is light. In the case of dark wallpaper, you can choose any color coloring of the corners, if only these angular elements emphasized the dwelling solidity.

If you do not know how you can enclose the arch in your home, it is best to carefully analyze the form of the structure, if it is difficult, and make a decision. Paint and whitewash are classic ways that certainly will not harm the appearance of the dwellings.