Instructions for installing a mosquito net on plastic windows with your own hands

Sometimes, changing the windows in the house, people try to save on trifles. The installation of mosquito nets on plastic windows, in general, is considered unnecessary. But, with the onset of the hot and humid summer, the attacks of mosquitoes, flies and other insects convince the inhabitants of the dwelling in the opposite - protection is necessary. To restore comfort in the house in this case, you will need to install a grid on plastic windows with your own hands.

Before you engage in an independent installation of anti -mosquito nets on plastic windows, it is necessary to order the grid itself from the manufacturer, of which there are a great many today. Different models of nets, the price of which also varies. Choose at your discretion, the main thing is to make measurements correctly. The size of the grid should be equal to the internal size of the window plus a supply of 2 cm on each side for fastening.

Necessary tools

1. Level (up to 50 cm)
2. Pencil for applying level
3. A screwdriver or a screwdriver for fixing the grid on the window, brackets, etc.
4. Small screws (up to 2 cm)

Mosquito nets are distinguished by purpose, design, appearance. To begin with, you need to figure out how mosquito nets are and how they differ.

Functions of mosquito nets for plastic windows

1. Protection from flying insects.
2. Protection from street debris, leaves, dust, etc.
3. Protection against random loss of pets from an open window.

Types of nets on plastic windows and methods for their installation

Frame removable grid

Such a model consists of an aluminum frame-frame connected by plastic corners and, in fact, the grid itself from a fiberlass, clamped in a frame using a sealing cord. These removable mosquito nets are placed on plastic windows from the outside, do not interfere with the opening of the wings. The grid is separated in half with a horizontal bar to give greater stiffness of the structure. Under the sealing cord, plastic handles are fixed that simplify the installation and removal of the structure.

Installation of a frame removable net on plastic windows

1. Mark the pencil, laying the width of the mosquito profile (1.6 cm) from the outer edges of the outer frame of the window. Spend the continuous line by connecting these marks. At the lower marking level, two smaller brackets will be attached, which should go with the net.
   
2. From the top line of the marking, put 1.2cm up on both sides. This will be the place of fasteners for two large brackets. Such an indent will provide a comfortable installation of the grid in the future.
3. Water the lower and upper brackets (or corners) with a screwdriver and screws).
4. Insert the grid into the upper mounts, gently holding it by special handles on the sides, and lift it. Next, get the net into the lower corners and lower the structure down.

Plastic windows "Antikoshka"

A mesh created specifically to protect pets from random loss, installed on plastic or metal brackets. The frame "Antikoshki" is made of the same aluminum. Black canvas can be steel, aluminum and from polyester with PVC settings (the most popular). The nets are equipped with several imposts (strengthening strips). The installation process of such special protective paintings is identical to installing frame nets. Only fastenings you need to choose steel, as plastic ones can break if the animal jumps onto the window.

Rotal mosquito nets

Such nets are usually placed on small windows. When installing them, the main thing is to attach a magnet and canopies. The process is sometimes complicated by the imperfect installation of the plastic windows themselves (non -compliance with the level when installing the window can also lead to a skew of a mosquito net).

Installation of rotary mosquito nets

1. Measure with a roulette on the frame at the site of the alleged fasteners of the awnings their width (2 cm) + the width of the aluminum profile of the grid (1.6 cm) \u003d 3.6 cm, carefully double -checking these dimensions to avoid distortions. Put the appropriate marks with a pencil.
2. We fasten the magnet in the center of the window, gluing it or screwing it with self -tapping screws.
3. We install the corresponding magnets on mosquito nets.
4. We check the design for opening.

Rolled mosquito mesh

The most popular, but most expensive model. Such nets are created according to the principle of blinds, twisted and retained in this position using a cord or a penalty and roller handle. The grid canvas fit tightly to the frame, which effectively protects against the penetration of small insects. These nets will be appropriate if you have no room for storing such things. After all, they can be hidden in an aluminum box installed in the upper part of the window opening. Roller mosquito nets have a frame on latches and holding strips.

Installation of roller mosquito nets

1. Remove the frame from the grid, exposing the places of fasteners.
2. Attach the mosquito net to the window, mark the installation sites, fasten.
3. Remove the lid from the holding bar, moving it up and down, finding it inside the mount.
4. Install the bar exactly along the entire perimeter of the window.
5. Make a grid with a twisting lever.
6. Close the bar with a lid.

Now you know everything you need to know to install mosquito nets on plastic windows. Drink! And comfortable to you summer!