Game complexes for children can be purchased in a retail network or built yourself. DIY gaming complex does not require special skills in Plotnitsky. Sprinkle the board in size, drive a nail or polish the wooden structure is able to every prime owner of the house. Children's game complexes, photos of which are posted on the Internet, are designed for different age groups.
Content
When equipping a children's gaming complex for the home, it would be reasonable to provide a space for additional structures and reconstruction in the future in a gaming sports complex for adolescents. Near the playground there should not be thorny bushes, dangerous structures and structures.
First of all, the complex should be safe and under your supervision. For the smallest, a small playground with a set of elementary gaming objects is equipped.
Planning and security measures for the playground
It is advisable to plant the entire area of \u200b\u200bthe game complex with grass. The soft cover will protect children during falls from possible injuries.
- For a full -fledged children's gaming complex, a slide, a swing, a house, a catka and other objects corresponding to the age of the child are installed on the site. Before the swing and behind them there should be enough free space.
- Supports for swings, slides, horizontal bars and other objects burst into the ground to a depth of at least 0.5 meters. Reliably compacted and poured with concrete. Some supports are additionally strengthened with crutches or stretch marks.
- The height and size of children's structures should be correlated with the age of the child. So for the smallest children, the swing is made 1.5 meters high, and the hill is not higher than 2.5 meters. All surfaces and parts are thoroughly polished and covered with paint or varnish.
Those elements of the gaming complex that are hard to make yourself can be purchased in the retail network. Do -it -yourself gaming complex is much cheaper and more reliable than purchased in the store.
Game elements for the children's complex
The playground for games consists of several game objects. The obligatory attributes of the children's playground will be: a slide, a house, a swing, and for the smallest - a sandbox.
- Of the four thrilled boards, the frame base of the sandbox is lost. The thickness of the board is from 2 cm, and the width is 25 - 30 cm. The corner compounds are raped by the spike into the groove. The pegs are attached in the corners and burst into the ground. Along the perimeter of the sandbox, a side is filled from a flat rail. The thickness can be from 1 cm and a width of 10 - 15 cm. In the center of the sandbox, soil is selected to a depth of 25 - 30 cm and is covered with a drainage layer of gravel or crushed stone. Then pure quartz sand is poured into the sandbox.
- The game house is cut out of sheets of waterproof plywood 20 mm thick. The frame and rafters for the house are chopped from a 40x40 mm bar. Plywood patterns are attached with self -tapping screws and stained with PF paint for external work. In the house you can equip a table and benches.
- Ready -made children's slides are sold in stores and designed for children from 2 to 10 years. There is a large selection of slides made of plastic, metal or rubber inflatable. Having decided to build a baby slide yourself, you need to take into account several important nuances. The supports for the trigger must be treated with an antiseptic or by corrosion products and deeply equipped in the ground. The railing of ladder and sides of the trigger gutter are attached with bolts and tightly dragged. All surfaces must be carefully polished and not have sharp corners. It would be reasonable to purchase a plastic trigger in the store.
- To arrange a swing, two “A” will be required - figurative racks from an inch metal pipe connected at the top by the crossbar. Rings or bearings are attached to the crossbar, to which the welding chains, metal cables or metal rods connected to a swing seat are welded. The metal rod, unlike chains or cable, does not allow the swings to deviate from the given path and prevents the drifts.
Game sports complex in the fresh air
With age, some game elements are removed or transformed into sports shells, for active leisure and physical development of the child.
- Sports shell "Log" is very simple. Several logs are vertically dug up in the ground, the distance between which is near O. 7 meters. On top of them, a horizontal log with a diameter of 25 cm is laid and attached with brackets. The height of the projectile depends on the age of the child.
- Having a little remodel of the swing, it may turn out to be a wonderful horizontal bar. It is optimal to make two or three horizons of different heights. The hobel racks are made of a metal pipe with a thickness of at least 1.5 inches, and the crossbars from a steel rod with a standard with a diameter of 28 mm.
- Both racks burst into the ground to a depth of at least 0.7 meters, the holes around the racks are compacted, covered with gravel and poured with cement mortar. The distance between the stands of the horizontal bar should not exceed 1.5 meters. After drying the cement mortar, additional fasteners are installed - stretch marks.
- For physical education in the air, a basketball ring is very popular. The standard dimensions of the basketball shield are 1.8 meters horizontally and 1.05 vertically. On a home sports ground, strict sports sizes are usually not adhered to. The shield, and sometimes just a metal ring with a diameter of 45 cm, is attached at a height of up to 3 meters on a pillar or a deaf wall of the house.