The popularity of drywall today increases, the scope of application of this finishing material is also expanding. It is used in construction when installing partitions and multi-level ceilings, alignment of the walls and their capital insulation. The universal properties of the plasterboard sheet make it possible unlimited, and thanks to the cheapness of raw materials, drywall is used not only on construction sites, but also on other economic purposes.
Content
Description of material
Sometimes I want to diversify the interior of your apartment, make a note of novelty, creativity and freshness. For example, replace the old furniture for more modern, make cosmetic repairs, or decide on major redevelopment, dividing a large room with partitions. With the latter, it will help to successfully cope with the universal in its characteristic and practical plasterboard. With its help, it is possible not only to extinguish and distinguish between space, but also construct the doors from drywall.
Installation of interroom doors is today a very popular service largely due to the fact that the sliding doors made of drywall are a fairly functional design that can also embello the room and save space.
Doors from drywall, whose photo you can see below are represented in different stylistic interpretations, and it must be said that in recently they began to make it quite often.
The practicality and appearance of such doors are not inferior to traditional designs, and in addition to the design of the indoor space, drywall is also used as composite furniture elements.
It's easy to work with him, besides, it is lightweight and malleable material. Special skills are not required when installing, however, like a large set of tools. Install the door from the drywall or the partition is quite forces with their own hands.
Easy-to-use material is even moisture-resistant and can be used both in the kitchen and in the bathroom. It is not necessary to align drywall walls, and doorways can be designing absolutely any forms.
Theoretically of the plasterboard sheet (GLC) is easy to do absolutely any construction, while it is important to observe all the nuances of working with this material.
Features and advantages of constructions from GLC
Why are plasterboard so often used in construction and domestic purposes? In fact, such a demand is due to its unique features:
- The installation of finished partitions from drywall does not require large financial costs, and the initial materials have low cost.
- Glk constructions are characterized by high reliability.
- The modern design of any complexity of drywall will help to implement. In addition, it can be saved with wallpaper and paint in any color.
- The configuration of any room can be easily changed using GKL. They are attached "on dry", and therefore their movement is not difficult.
- Plasterboard is the most environmentally pure building material. This is done by the safe components used in the manufacture.
- Easy weighting plasterboard sheet as easy as possible when mounting.
- In addition to the above features, this material has elevated sound insulation and energy-saving properties. It is perfectly "breathing" and supports the optimal microclimate in the room.
- Flexible plasterboard sheet can be cut even with a knife.
Disadvantages of plasterboard:
- almost all kinds of GLCs absorb moisture and destroy;
- with the inactive transportation of this material, it can be cooked;
- on plasterboard partitions without a metal frame, it is better not to hang heavy items;
- sometimes GLK is problematic to raise the stairs of a multi-storey house.
Types of plasterboard partitions:
- Deaf. Their feature is that such partitions are mounted by solid sheets. Such an economical option allows interior partitions in different modern styles.
- Glazing partitions. Usually used when arranging offices, banking institutions, other organizations where all enclosing elements must be viewed.
Dokewwoker door do it yourself
Before making the door from drywall, you need to choose a suitable place to do this and prepare the doorway. To do this, use a wooden opening, reinforced with a metal profile. Only so you can give rigidity to the frame. As the main tools when creating a frame, we should use scissors for metal, self-drawing and screwdrivers.
Production Stages:
- Plasterboard for interior doors is better to choose a thickness of at least 9.5 mm. For these purposes, even the remnants of the material will rise, since all the joints can then be sharpened.
To work, you will need:
- plasterboard sheets;
- knife, pencil;
- planer for edge;
- self-tapping screws (25 mm);
- metal perforated corner.
With the help of a pencil and ruler, make marking on the GLC, then cut it into parts and align the cuts of the plane. The frame-sheathed on both sides is gently fixed by self-drawing so as not to damage the fragile plasterboard. At the edges on putty, you need to fasten a perforated metal corner, which will prevent damage to the door during the operation of the door.
- When the corner can dry out the finish finish. Strong the cloth, align the spaculous mixture. In order for the putty layer, cracks appear, handle the joints with a sickle. Cover the plasterboard door can be panels, paint or tile. But before this on the door, make a loop and do the holes for the necessary fittings. If you need to additionally insulate the design between the sheets of the hyipsocarton, such materials will come to the rescue:
- styrofoam;
- glass gaming;
- mounting foam;
- polystyrene.
- The installation of a traditional door on the loop is made elementary, but to build a sliding door, you need to consider several nuances. In a construction store, purchase a special sliding mechanism with instructions. The rail for the door is usually attached to the floor to the entire width of the opening.
- After the door is in its place, you can attach the platbands and the necessary fittings.
Plasterboard door opening
Today, many homemade masters are wondering how to close the door with plasterboard. This is necessary in cases where you need to get rid of the doorway or remove it at all. In order to do everything correctly, you need to start to dismantle the old door.
- Remove the door frame with the cloth.
- The resulting potholes in the opening are cleaned, and align the putty.
- On the floor within the opening of the wall in the wall, set the guide profile of metal. It is necessary to mount it so that the leaf of the plasterboard subsequently did not speak for the wall plane, it should be in her thief.
- Then at the same principle attach the top profile.
- Two metal racks set two edges of the doorway, and one in the middle.
- To all fixed profiles with self-drawing, attach the carved HCL.
- On the other side of the wall, do the same thing, that is, the doorway needs to be seen on both sides.
- At the very end of the join of the finished design, you can neatly sharpen and go to the wallpaper. For details on how to make a door from drywall, you can view on the learning video.
Handstocks made of drywall do it yourself
Before starting work on the manufacture of a plasterboard partition, it is necessary to take into account several recommendations from the specialists:
- determine the exact location of the design, calculate and purchase all the necessary materials;
- according to its drawing, make marking on the floor, on the walls and ceiling. Only after that you can proceed to work.
Collect partition for the room is quite difficult, for this you need certain skills and knowledge. Use the building level and centimeter so that the wall turns out to be smooth. After working on the plasterboard of the metal profile is finished, proceed to decoration. You can leave the septum with wallpaper, pre-processing the seam by mounting tape or putty.
According to the same technology, work is made to reduce the doorway. This and other installation work should be with great responsibility, because minor errors can lead to damage to materials and cash spending.
