Baby swing houses do it yourself. How to make children's swing with their own handsinformational construction site |

It is worth saying that the swing is needed not only for the free pastime of children, but also for the development of their physical and sports indicators. Thanks to the half-hour daily walks on a swing, a child can simply train his vestibular apparatus, improve the coordination of movements, etc. In addition, the swing is needed not only for children. They will also be an interesting addition to the garden arrangement for adults. After all, riding a swing, you can improve your mood, calm the nerves, put the thought of thought, enjoy the beauty of the surrounding nature. Swing will be the perfect supplement of the garden of stones or any other pleasure zone. Moreover, they can be erected from any submitted materials and thereby significantly reduce their financial expenses for installation work. Learn more about how to make children's swing do it yourself - further in the article.

Content

Choosing a place to accommodate children's swings

Choosing a place to accommodate a swing, you need to consider the following factors:

Distance from home. The playground on which children's swings are placed, should be near the house and at the same time look through the windows well, because the child must always be in sight.
Remoteness from household buildings, fences, fences, trees, water bodies. After all, riding a child should be safe, there should be no obstacles to the "flight" on the swing.
The presence of light and shadow. The playground on which children's swings are located should be located on a well-lit clearing. At the same time, this area at lunchtime should not be under the open sunshine.
Climatic conditions. In the territory where the swing is placed, there should be no higher level of humidity and drafts, because it can all be the cause of a cold in a child.
Terrain. The playground where the swing is, should be smooth. It should not be poisonous plants, honeymows or bushes with spines.

Children's swing do it yourself from metal

Metal characteristics constructions

Most often, children's swings are emitted from wood, as it is a traditional, familiar, pliable and eco-friendly material. However, with the arrangement of large-sized playgrounds, it is best to build a swing of metal. They have several advantages:

Durability. Agree, the service life of metal structures is significantly higher than the service life of wood products.
Wear resistance. Metal design is quite difficult to damage.
Practicality. Metal structures are not affected by the processes of rotting, drying, and others. There will be no adverse weather conditions for such swing, such as rain, snow.
Aesthetic beauty. We are talking about products made using artistic forging. They will become an excellent addition to any garden-park composition.
Reliability and safety. Since metal structures are very durable, they are not scary to use children. And, as you know, safety is the main condition for building street structures for children.
Efficiency. If you compare the cost of metal structures and products from high-quality durable wood, then the first of them have a lower price.

Flaws:

The need to have the skills of welding work.
Heavy construction weight.
Based on the heavy weight of the structure, metal parts are more studyable than light wooden.
Metal designs are known to be afraid of corrosion and rust.

Baby swing do it yourself: drawings

In the initial stage, when installing children's swings for the house, with their own hands is the planning and design phase. Here is necessary:

draw drawings and product schemes in the finished form,
designated design dimensions,
calculate the preliminary estimate for the purchase of materials and carrying out installation work.

Before making drawings, you should decide on the type and options for placing the future design. To do this, consider ready-made vendors of products from manufacturers. So, the swing from the metal is:

Separate designs. Can be installed in any part of the country area. Made both metal and wood. For them, no additional supporting structures or suspensions do not need to be made.
Sofa swings. As it is clear from the title, usually such swings are made in the form of a suspended sofa, which can simultaneously ride 2-3 people. You can make such pendant children's swings for home with their own hands from both the wood and wood. If you make reliable blocks of block type, then the design of this type will be sufficiently strong and convenient.
Portable variant of the swing. They also have a mobile name. Typically, such structures are made in such a way that, if necessary, they could be transferred from place to place.
Worn metal swing. Factory structures made using artistic forging can be the most real decoration of any country area. Make such home children's swing do it yourself - a rather difficult task, because this will require the skills of welding. In general, such structures though have a high cost, but are durable, reliable, aesthetically attractive.

When they were determined with the type and dimensions of the future design, you should begin the drawing of the drawings. Examples of diagrams and drawings of metal swings are presented below:

Children's swing their arms from metal: photo, work order

Next, consider a phased procedure works, how to make children's swings his arms in metal. It will be considered the option to create an overhead structure.

To work will need the following tools and materials:

Bulgarian - cutting materials.
Builder's level and tape measure - measuring.
Welding machine.
Personal protection during welding operations.
Drill. Drill.
Screwdriver.
Screws, bolts, nuts, hooks, and other fasteners.
Spanners.
Area Metal, metal profile pipes.
Wooden blocks - for the seat assembly.
Polycarbonate - for a pass device.
Stain, paint mixture.

Procedure for work:

The first stage - the planning and design. At this stage the product design and embodiment is drawn circuit. It should be taken into account for how many children are swings. If you plan to do the design as a suspended sofa, its width should be at least 1 meter. In addition, there should be a gap between the stands and the bench. It should be 30 cm.
Next, you need to gather support karkas.Dlya of metal pipes using grinders cut to desired lengths. The correctness of the structure dimensions should check on earlier made to the drawings.
With the help of the welding machine in pairs connect the cutting metal pipe. As a result, we must have two elements that are L-shaped. The upper parts of the resulting pieces to be cut sharp ends. A lower portion side parts form part of the structure.
By welding connects the rectangular base frame and side sections. Further, the top side portions of the horizontal part is welded construction. Follow the correct connection of elements. Thus, upper beam must be positioned strictly parallel to the base structure.
We proceed to the seat assembly. To do this, make a frame made of metal profiles. Placed on it interconnected by bolts wooden boards. Note that all the wooden parts must be well sanded and treated with stain. In addition, the bolt head should be good to drown in a wooden base, so they do not injure the child.
In the corners of the frame are fixed eyebolts. These "lugs" with carbines will be attached chain.
At the last stage is set visor of polycarbonate. Its mounted at a slight angle to rain on its surface can flow down without any problems.
All metal parts are treated with primer and paint composition.

Children swings with his hands in wood

Swing-pendulum

Advantages of structures made of wood:

Environmentally friendly material.
Compliance, ease of processing.
There is a breed of wood, which have a price much lower than the metal structures.
Safety. Since the weight of structures made of wood is small, it reduces the degree of injury when using them.

For kids up to 4 years will be interesting swing, a pendulum. Build them as follows:

Pick the most suitable material for construction. It can be strong wood such as oak, beech, hornbeam, walnut.
The selected timber vystrugivaetsya design the desired shape: the support and cross-board (which will sit children when riding).
For cutting structural elements of the swing of the pendulum, you can use the following scheme:

The ends of the lateral planks should be rounded. All the details of the construction must be thoroughly sanded.
Bonded structure together with screws and nails. For strength, you can use a metal corner.
All design elements are recommended to treat the stain and cover the paint composition.

Children's swing for students: photo, work order

Initially should determine the type and dimensions of the structure. So, swing frames are of the following types:

U-shaped. It is the most popular option. However, to ensure the safety of the base frame must necessarily concrete.
L-shaped. Characterized by a high rate of resistance than the U-shaped frame. In this case, the supporting pillars are fixed at the point of contact so that they eventually formed an inverted «V».
X-shaped. Held together almost in the same way as the construction of the L-shaped type, but not in the joints of the ground and just below.
A-shaped. The most stable and reliable option. Good indicators of stability are ensured by an additional bridge.

Tools and materials:

4 pieces of wood 100x50 - for skeleton.
to seat the board (the size of 600h300h30).
Board wooden backrest assembly swings.
Drill.
The welded chain with an anti-corrosion coating is as a suspension.
Fasteners - self-tapping screws, carbines, metal corners.
Suspension.
Concrete - to secure the framework of the frame.
Primer, paint and varnish mixtures.
Screwdriver.
Saw.
Machine for grinding.

The order of installation work on the construction of wooden swings for schoolchildren with their own hands:

After it was determined with the type and option of the frame for a swing, you should move to the preparation of the drawings. They must take into account the dimensions of the future design, the options for its fastening, the base configuration, the type of seat and the length of the suspension.
We clean the platform on which the installation of swings is planned, from garbage, shrubs, stumps sticking the roots of plants. Pretty spill surface.
Collect all wooden structural elements so that they do not harm the child, then cover them with a layer of primer, as well as the composition protecting against rotting.
Mount the frame of the swing. As mentioned above, the most stable is a-shaped version. To do this, fasten the upper racks. The places of connection of the racks, in addition to pinching with self-draws, should still be glued with reliable adhesive composition. The lower part is deepening to the ground and fall asleep with a layer of rubble. The base of the frame is concreting.
Go to the mount of the seat. We tighten the wooden boards with each other, they are grinding them.
Fresh swing to crossbar using suspension and chain. To do this, we throw the chain through the crossbar and then fasten its links with each other.
We process the finished design of the primer, and then the paint mixture.

Homemade children's swing do it yourself

If you wish to post baby swing at home, you can make the following option - suspended structures with textiles.

For their manufacture, the following tools and materials will be required:

Durable fabric.
Tape - for edging the edges of the product.
Wood planks-sides. You can use 4 spoke handles from garden shovel.
Boards for mounting seats.
Morid for wood processing.
Sanding paper for grinding wooden parts design.
Rope for hanging design.

Procedure for work:

Initially, the drawings should be prepared by which the installation of the swing will be performed. Here it is necessary to take into account the exact dimensions of the structure, taking into account the weight of the child.

We proceed to the manufacture of wooden side planks. This will require 4 wooden planks. They should be carefully polished and covered with a mourn. You can use 4 holders from the shovel. They have a rounded form.

Next of dense tissue cut out parts of the desired size. With the help of a sewing machine and braids process the edges of the material. If a child is under 2 years old, then you can do in front of the textile side two notches, designed for the baby's legs.

We connect all parts of the fabric using a sewing machine so that the boat barns are inside. We do this as shown in the diagram:

The seat of the swing can be made of wooden planks (covered with cloth) or just from one fabric (for very little children). If wooden planks are used, they should be cooled to polish and cover the protective composition.
The edges of the rope on which the structure will be suspended, we draw through wooden planks-sides. Fix with strong nodes. For reliability, the nodes can be sought.
From above, we have done a rope through a metal crossbar on which the product will be attached. Note that the safety of the child is the priority rule. Therefore, for reliability, the transverse metal bar should be fixed with metal corners.
Let all the design on the metal crossbar. We check its reliability.