Wooden horse in the garden with their own hands

Dachas have always attracted not only the place where you can relax from the bustle of the big city, but also a space for creativity and fantasy. The decor for the cottage is not necessary to buy in the store, you can make it with your own hands from the girlfriend. For example, a wooden horse.

Wooden horse for giving with their own hands

For the manufacture of a horse from a tree you will need:

1. Log.
2. Boards.
3. Spike.
4. Bruks.
5. Selfless.
6. Nails.
7. Rope.
8. Glue.

Proceedings:

1. Two spins, the thickness of which is 3 cm, fill the plate 15 cm into width and 50 cm in length, the thickness of the value does not have. You must form a rounded shape box that serves a horses torso.
2. To make a toy leg, you need to choose a strong material so that the figure is sustainable. As a material, the bars will be suitable, half the meter. They are attached to the torso with self-draws or nails on the spikes ahead and behind. The nails and self-tapping screws should be at least two for each leg, then the horse will not be fused.
3. The horse's tail is best to do from plywood, for this first need to draw the layout on the material, and then cut it. With the help of bar and screws to attach it in the backup.
4. For the neck, the board or timber is suitable for 40 cm long, to which the head will be attached. It must first draw it on the plywood, and then cut. You can use a thin board for these purposes.
5. From the spirits make eyes and ears and attach them to the face. Thin branches can be used as the mane. Next to the head you need to attach to the neck, and the horse is ready.

Painting wooden horses

If your horse in such an unprocessed form is completely poured into the garden design, you can leave it so and only open the paint so that the boards are not impaired. And you can give a horse to a certain color and for this will be needed: varnish, paint and veil, or replace all this with a colored varnish for a tree. Rush the face of the animal, mane, you can paint the horse under the color of the zebra or multi-colored stripes. Such a toy can be delivered and near the playground and at the place of rest. The torso at the horse is a box, so it can be poured into it with chernozem and plant flowers, then the horse turn their simple decor in the flower.

In the necessary materials, glue and rope were mentioned, glue should be fastened thin and thick parts, and the rope is an additional fastening, it also serves as a decor.

Horse from branches

This is a way to make a wooden horse with your own hands very interesting. For him, expensive materials will not need, they all usually have on any country house. The basis of the creation of the figure lies the use of branches and roots of trees.

Proceedings:

1. Before starting to work on construction, select a place in the garden. Where the feature will be placed. Because it will be necessary to do it in place, it is impossible to transfer it.
2. Work begins on creating a horse from the carcass branches. The remaining details will be attached to it. It is necessary to take away large branches and insert them into the ground for reliability. Consider the option that these branches are made of frame and will serve feet for a horse.
3. After the frame is installed, start to told it with branches, in the same way, as the usual braided fence is made. First, the frames are tired of vertical branches, and then their horizontal. Do not rush, branches must be securely attached to each other so that the design does not fall under the influence of wind and other natural phenomena.
4. Make a skeleton for the neck and also soak it.
5. It is better to do the head separately, it will be more convenient, and then install it ready for your neck.
6. Complete the mane figure and one can assume that the horse is ready. If you wish, it can also be painted or opened with varnish, so the branches will be longer to serve.

Make such a horse under the power of people patient, because from the first twice the branches may not be intertwined with each other as needed and to get out of the form of the structure. But you can always start with small figures, and then go to great. In addition, you can see examples of wooden horses in the photo.

Horse with a trolley

For the manufacture of a horse with a trolley, you need thick and thin birch branches, screws, corks from bottles, rubber winding.

1. For the horses body, a thick birch branch is suitable. It is necessary to cut the torso with a length of 50 cm.
2. For legs to take the branches smaller. In order for the figure to stand tight and not hacked, you need to drive the legs into the ground. In this case, all the work needs to be carried out on the place where the horse will stand, pride it in advance.
3. In the Churban, who will serve as a muzzle, you need to cut the recess for the mouth.
4. Combine head with a torso with neck, all wooden parts are fastened with self-draws.
5. Eyes for a horse can also be chopped out of wood, and you can use ordinary corks from under bottles. They can be simply glued to the muzzle for wood glue.
6. For the mane and tail you need to take thin branches and wept them into a broom, attach them to nails to the body.
7. For the scene and saddle, you need to take the rubber winding and attach them to places with glue or nails.
8. Next came the turn of the cart, it can be constructed in different ways. You can take four wheels and connect them with birch sticks with screws, so it turns out the simplest trolley. You can take wooden boards and knock off the wooden box from it, by type of real cart and attach four wheels. You can pour in the cart and put flowers into it. Interestingly, vegetables growing from it, such as pumpkin, look. And it is possible to put in the Toy Old Tag, then the composition will be fully completed.

Horse from plywood

This is the easiest option to create a craft, which can only be represented. You can attract a child to the manufacture of such a horse. You need a flat plywood sheet and make a drawing of a future wooden horse on it. Next you need to cut the pattern with an electrolovka. And attach the figure to the brushes into the ground or attach the wire to standing trees. The figure of the horses is ready, and it remains only to paint with paints or make burning.

So that the decor for the garden in the form of a wooden horse did not look alone, one can add the composition with some accessories. You can attach a wagon or carriage to the horse. You can put a bucket with water or flowers, or a trough with a hay. The most advantageously looks the horse along with other wooden figures, so if you have time and desire, you can make her a good company.