It is obvious that sooner or later the toilet set in the apartment acquires certain damage, and the only way out of this situation is a complete dismantling of plumbing, and further installation of new equipment. Practice shows that the hosts, usually not particularly essential in the plumbing, are extremely rarely risking and disassembling toilet bowl with their own hands. Indeed, in certain situations, the situation may be quite unpleasant, especially if it comes to expensive plumbing.

It is advisable to take advantage of the help of specialists, if there is no confidence that the personnel of the dismantling will be used as smoothly as possible. People without experience are often trying to hold such events, claiming that something similar they spent earlier. Practice shows that the manipulations associated with the toilet often have many features that are not connected with another plumbing. Therefore, you need to think about the situation several times before dismantling personally.

At the same time, you can explore a fairly simple scenario of dismantling plumbing to carry out such events yourself. It is obvious that the process will also need attentiveness, responsibility, as well as at least some experience in sanitary activities.

Of course, you should not forget that almost all works related to plumbing are not the most pleasant. Therefore, you need to be prepared for any turns of events.

In this article, we will consider the basic details related to the dismantling of the toilet, as well as analyze the main difficulties of this process. After examining this material, it is possible to carry out the plumbing disassembly without an extraneous help.

01-img_6975

Features of dismantling toiletza

Immediately it must be said that problems with the toilet sooner or later still arise. And this is especially true for inexpensive plumbing, which has no best dimensions and proportions. Accordingly, if cracks appeared on the toilet, it is necessary to respond as soon as possible to this situation. Many people who do not want to replace the toilet, and also do not want to acquire plumbing, make a decision at least to correct the situation. We are talking about the fact that cracks can be slightly "pushed" with a cement solution or other mixtures.

Practice shows that such solutions do not benefit anything good. After a short period of time (long in such a state, the toilet will not be able to stay) Plumbing again begins to make himself felt. Unfortunately, over time, the situation will become worse and worse. Thus, it is obvious that there is an urgent need for dismantling and subsequent installation of a new toilet bowl.

It often happens that the owners conceived repairs, which includes replacing the old plumbing on a new and modern. Again, without dismantling it is not to do here.

Next, we will consider the process of dismantling the toilet, which will allow you to engage in such events even to people without experience. It is important to note that in this process, each detail is extremely important, so it is worth a clear technologies, otherwise the problems will definitely not succeed.

If we talk about the help of third-party specialists, such events take away from the owners not so little tools. Therefore, saved money will definitely benefit, especially if the situation with money is tense.

santehnik0019723363515

The process of dismantling toiletza

Preparation for dismantling

It is worth noting that a really much depends on the preparation for dismantling. First of all, you need to pay attention to the presence of various tools with which all activities will be conducted. We are talking about the keys of different sizes. In addition, it will not be superfluous, with which the dirtiest work will be carried out. Experts advise to have Pasalati with them, as well as various rags, with which water will be removed, the remains of which will make a lot of problems for the owners.

  • Do not forget that almost all activities related to plumbing are "black", so it is necessary to wear rubber gloves before carrying out any actions. Obvious is the fact that, above all, there is a need to protect against microbes and other bacteria that can create serious problems for a person.
  • Before the start of the events, tooling the toilet with special antiseptics, or, in extreme cases, running water. After that, you can be sure that there should be no particular danger from the toilet bowl.
  • Next, it is necessary to release the available space from the surrounding items. Obviously, they can create certain inconveniences, therefore, the movement should occur as simply simply and without difficulties around the toilet.
  • It is imperative to start disassembling from shutdown in the supply pipeline of cold water. In addition, you need to empty the toilet tank. It is necessary to do everything possible to make the sewer inactive. Often, the riser is often overlapped for this business, and some time of access to water in certain residents of the house will not be simply. It should be verified that the water supply system is inactive, and water will not be any problems during dismantling. Now you can proceed to basic work.

Liberation of the foundation of toilet bowl

  • It all starts with disconnecting the flexible hose, which serves water from the pipe. Immediately after that it is advisable to dismantle the toilet tank. Obviously, to raise the toilet with a tank more difficult than without a tank, so first you need to think about this issue. Last water descends, which perhaps for some reason still remains. Next, unscrew the tank fastening nuts that are on the back of the design. Now the lid opens, and if the tank is placed on the loop, it is possible to remove the toilet component without additional opening.
  • The release of the bowl of the toilet is produced in several steps. It should be borne in mind that often the toilet is specifically laid in the center of the tile surface, and with such a situation will have to be simply knock out the plumbing. Most often, the toilet bowl is based on the basis of sex with the help of 4 mounts. Often, the fastening based on studs or nuts is used. Most situations have to look for a spanner of a particular diameter to dismantle quickly and efficiently.
  • If we are talking about fixing the toilet bowl based on studs, then it is necessary to raise the base, and then, producing some patching of plumbing, you can break the design. In the event that the seal of the termination is produced on the basis of cement, it is advisable to split the frozen mixture with a chisel and hammer. Specialists advise you to make a choice in favor of a thin chisel, which allows you to pull the surface parts with high accuracy. Easy strikes are made, which should not create any problems in the repair or construction of any difficulties. All fragments that remain on the surface should be tried again, since these components can seriously interfere with the further installation of a new toilet bowl.
  • Often there are situations where the owners come across a fairly serious option associated with the dismantle of the toilet. We are talking about the cases when the toilet is attached to a wooden base. This feature is that when dismantling it is extremely easy to damage the plumbing. In this case, it will be necessary to simply beat off the bottom of the toilet so that fastenings remain at the floor level. After that, the plumbing takes place in parts.

eTU-ZAMAZKU-NAM-Predstoit-Akkuratno-Udalit-Ne-Raskolov-Vypusk

Dismantling from sewer pipe

Surely one of the most serious tasks associated with the dismantling of the toilet is to disconnect the cast iron pipe of the sewage from the toilet. Immediately it is worth noting that the disconnection occurs in several ways. Each of these methods affects the plumbing in its own way, so you need to analyze all possible options. Often, for such cases, the owners use the services of specialists who are guaranteed to qualitatively fulfill all the draft work. Unfortunately, often for this request considerable money, so many owners risk spending the whole process personally.

It should be borne in mind that immediately before dismantling the toilet, it is necessary to make a peculiar tube that would shut down the hole in the tap tube. Most often, the diameter of this pipe is approximately 100 mm. If this is not done, the sewer gases will fall into the apartment, and this will create far from the most pleasant setting.

  1. Surely the most common method associated with the dismantling of the sewer pipe is the usual destruction. Thus, it all begins with the fact that it is necessary to repel the removal, carry the toilet, and then the fool is cleaned from the residual ceramics (ceramics and mortar). It is important to note that the discharge can and just break down, for this, the jack of removal, as well as the pipes from cement is qualitatively cleaned. In such a situation, you just need to lift and simply pull the removal up.
  2. The option is safer to the results of the work carried out by the cleaning of the joint of the sewer tube with the toilet from the material-seal material, as well as cement and other components. You should also raise the product to analyze free movement in the pipe. After that, there is a gradual scrolling of the outlet, after which it is pulled out of the pipe. At the same time, it is necessary to clean the passage from the cement mortar. If in this situation it turned out to get a toilet, then there is a complete cleaning of the base for the new plumbing.

Disassembly of old toiletz

Obviously, the situation associated with the dismantling of old toilet bowl is quite acute. The situation is in such a way that the Soviet toilets are installed dozens of years ago, and remove plumbing for the further installation of the new product - a difficult task.

Specialists note that Soviet toilets have an unusual design that does not simply take and dismantle the plumbing.

First of all, it is necessary to examine the aunt toilet bowl in order to roughly estimate the situation associated with the fasteners.

Another problem is that many owners who have decided to dismantle the old toilet, want to re-use plumbing, but elsewhere. First of all, we are talking about a country area where such "amenities" is not at all. In such a situation, it is extremely difficult to make the toilet to remain in proper condition, which would allow to use it in the future. In Soviet times, the joints were embarrassed so closely that it was practically no possible to bring down the ceramic product carefully. However, there are rare cases when the process goes out enough smoothly.

Arranging temporary toilet

Often, under repair conditions, it is necessary to establish a temporary toilet, which would allow not to feel special problems related to the conveniences familiar to all. Temporary toilet is the usual plumber, but without a drain tank.

Thus, for flushing the toilet, it is necessary to use water from the bucket. This, of course, is not the most optimal option, however, the practice shows that there are no special difficulties in residents in such a situation.

It should be borne in mind that it is often necessary to place a shield under it often to be placed, or part of the chipboard (dimensions of approximately 500x500 mm). Fastening occurs on the basis of screws with washers. Experts recommend purchasing screws with hexagon heads. The main essence of the task is to ensure that the tenants of the apartment for the period of repair can without any particular difficulties go to the toilet. Thus, the external problems of plumbing can not be very thoughtful, as it will be very soon, everything will be fixed.

It is also worth paying attention to the fact that the temporary plumbing is advisable to attach to the sewage of the corrugation. If everything is done correctly, this design is extremely quickly adjusted to the conditions if it needs to be transferred to another place. Of course, this does not mean that the toilet and fastening should resemble some failed attempt to make a temporary design. With further repair, the space should be quite clean.

unitaz4.

Installing a new toilet bowl

After we dismantled the old toilet, you should think about installing a new ceramic product. It should be borne in mind that to obtain the optimal result, it is necessary to have a corrugated pipe, the length of which is about 15 cm, as well as fastening elements and eccentric. Directly corrugated pipe is used instead of the old communication, and eccentric is necessary for connecting the toilet to the corrugation.

As for the fastening methods, it often happens on the basis of dowels. Also, the method of attachment to the tafft is also used (it is a wood board, which is located in the floor recess). In addition, the fastening based on epoxy glue is also quite good efficiency. In this case, a certain layer of resin is applied to the support surface, after which it is necessary to press the toilet to the floor. Next, we will consider in more detail every method of fastening.

  • Fastening with dowels. The most important question associated with the fastening of the toilet bowl based on the dowels is based on fastening options. Often, the old placement of fasteners coincides with the new one, and then there should be no special problems. At the same time, you should not forget that the old holes may be too large, and this will create some inconvenience for further work. In addition, it is strictly not recommended with a lot of power to score dowels in small holes. If cracks are formed, then the toilet will be disturbed by instability, and this, of course, creates big problems. It is also important to remember that the placement of the toilet itself should be as appropriate as possible. The thing is that the corrugated pipe should join without the slightest obstacles. Already after the best place was selected for the placement of the toilet, it should be designated for the landing plate. Accordingly, holes are noted, which will later be created on the surface. Drilling occurs with the help of a diamond drill. In addition, it is often about shock drilling, which is used everywhere, except the upper layer of tile.
  • Mount to taffette. Before work, you need to prepare the holes for the toilet. In the event that the standard holes are suitable for the toilet holes, the whole process occurs extremely quickly and efficiently. However, it is necessary to pay attention to the fact that in a matter of fact, special nozzles should be used, which often come complete with purchased plumbing.
  • Fastening toilet bowl from the inside. The inner fastening is used not as often as external, so few people are focused on this issue. Attention should be paid to the fact that first of all on the tile marks the place of attachment, after which there are places for fasteners. Now the holes are drilled under the fastening of the toilet. In marked places, small chips are created that simplify the process of drilling. Next, dowels are inserted into the prepared holes. After attachment, the gasket is inserted. Instead, you can fill with silicone fastening contour. Silicone quickly fills all the irregularities and cracks, which makes the fastening really high quality.

Comments are closed.

/ Register To post comments