The latest building materials and modern technologies accompany the creation of not only stylish and incredibly beautiful interiors, but also simplify the process of finishing work. Each method for the design and decoration of the room is peculiar, has its own nuances and is applicable depending on some features of the room or ideas of the author.
Content
One of the most relevant at the moment of the interior design is decorating arches. This type of decor can give the design of originality and extraordinary. Decorative plastic arched corners that carry both a practical function and aesthetic cope with the design of interior openings. Before decorating the openings, it is necessary to figure out what arched corners are, how the installation of the arched corners occurs and how to properly glue the corner to the arch.
Why do you need arched corners
The advantages of the arched corners are undeniable, therefore, having chosen this particular type of finish, the owner will receive a lot of advantages. Decorative arched corners have an impressive service life - up to several decades. However, they do not require painting and easily wash. The price of arched corners is quite acceptable and affordable to everyone, and the choice is simply amazing in the variety of colors and shades. In addition to the fact that the arched corners of decorative are mounted on any type of surface, they also hide irregularities, gaps and other errors of corners. But still, their main function is to highlight the ornate bends of unique design ideas.
Types of arched corners
Decorative arched corners are an optional element of the design of the armhole, but with the help of them it is easy to give the interior a finished look. Not every decorative part is suitable for the design of the arches, since each arch has its own configuration, and the corners are certain sizes, and they are created to design structures with uneven lines.
Decorative and plaster corners
It is no secret that the facets of arches are subject to aging and subsequent destruction. Unprocessed arches abrasion and crumble over time. To prevent this undesirable process, the edges of the arches are framed by special corners, the purpose of which consists in protecting the edges of the arch from deformations, cringing putty and abrasion. For functional purposes, the arches are: decorative and plaster. The latter are the base on which plaster is applied.
In turn, the arched corners of decorative carry mainly aesthetic function. In addition, this element of the decor also hides light bumps and errors of openings. A decorative arched corner is presented in a large assortment in stores: a huge selection of colors and materials.
Plastic corners
In order to enhance the edges of the opening in the wall, plastic arched corners are most often used. They are made of polyvinyl chloride with the addition of special substances affecting the flexibility and strength of the corner. To obtain high -quality finishing material, the PVC sheet is bend the hot bending by an angle of 90 degrees. Thanks to its chemical composition, the profile takes the desired form, becomes more durable and eliminates the structure of the structure.
The most common arched corner of PVC is white. White corners made of plastics are very in demand due to their versatility and low cost. However, corners are also produced in other colors.
Advantages of decorative corners from PVC:
- Easy to wash both ordinary warm water and with the use of cleaning products.
- PVC corners are very simply mounted with sealant, glue or nails.
- A low price allows you to use plastic corners for both decorative purposes and for decoration.
- Plastic arched corners serve as excellent protection of doorways from potholes, abrasion and destruction.
- The long service life for more than 50 years.
- The variability of decorative decoration of arched openings is due to the variety of colors and sizes.
Tools and materials for installing the arched corner:
- decorative arched corners,
- glue for PVC materials,
- self -tapping screws or nails,
- rubber hammer,
- liquid nails,
- putty,
- primer,
- sealant,
- spatula.
Installation of the arched corner
Installation of decorative arched corners requires preliminary installation.
- Calculation of the required amount of profile. Decorative arched corners are sold in the form of planks 3-7 meters long. It is recommended to buy corners at once a few centimeters longer to insure yourself with errors in the calculations.
- Cutting corner planks is done gradually. No need to rush with cutting the finishing material at once for both sides of the armhole, because there is a risk of spending excess material.
- Determination of the composition for the sticker of the arched corners. For example, in order to glue a decorative plastic arched corner evenly and beautifully, it is better to choose a silicone plumbing sealant - it will definitely not appear on the wallpaper. And since the sealant is humid, it will not be difficult to remove it from any surface.
- Turning the planks. To cut the corner planks, a special painting knife or a knife -haired woman is used.
- Docking. When decorating the lateral and upper corners on the opening, there is often a need to dock at 45 or 90 degrees. For accurate cutting, it is worth preparing a knock in advance.
Surface preparation for the installation of arched corners
- Before you glue decorative corners, it is necessary to clean the surface from pollution, old wallpaper, putty and non -keen materials.
- If the base is fat, then it should be treated with a solvent or degreaser.
- The profile is glued only on the prepared wall, i.e. Preliminary putty and surface primer will be required. After the construction mixtures (putty and primer) drying out, you can start the main work - glue the arched corners.
Installation of the arched corner
The process of installing the arched corner is surprisingly simple. There are several ways:
- glue the arched corner;
- fix the corner with self -tapping screws;
- pin with nails without hats.
How to stick an arched corner
In order for the arch to last a single year, it must be strengthened. Having learned how to glue the arched corner, the service life and safety of the arch will increase significantly. Typically, decorative corners are attached to liquid nails or glue. It is better to buy nails in a special tube for a gun. This will allow you to easily and quickly apply the adhesive composition. Before buying glue, you should pay attention to its color. Colorless glue is suitable for colored corners, and white glue is for corners of a similar color.
So, the adhesive is applied with a thin layer and is evenly distributed in profile. Next, the decorative corner is applied to the opening. For a more uniform distribution of the adhesive, the corner can be slightly moved. Then, for a while, the corner must be removed from the surface and wait a little time. After that, the arched corner is again pressed tightly and is additionally fixed with adhesive tape or painting tape.
How to fix the corner with self -tapping screws
Decorative arched corners can be screwed through special holes. In order for the profile to tightly fit the arch of the arch, the frequency of fastening of the screws is determined. However, this method of attaching the arched corners has its drawbacks. If the fasteners are pulled a little, then the profile will bend. And also the moment of twisting of self -tapping screws can lead to cracks on the surface of the angle. It is also necessary to take into account the fact that the fasteners will be visible, therefore, little will remain from aesthetics.
Fastening corners with nails without hats
The installation of the arched corner is often done on nails without hats, which are clogged around the perimeter of the arch.
Tip: nails without hats are clogged so that their protruding part is less than the thickness of the corner.
Additional material on the topic “How to glue the arched corner” is presented in the video.
A beautifully designed arched opening will allow you to move away from traditional solutions in design and architecture, often applicable in standard construction. The arch will not only decorate the doorway, but also serve as a visual separator of the space.
The flexibility, variability of the application of materials, a variety of colors will create a unique finish that will bring special attractiveness, unusual forms, asymmetry into the interior. Having studied the information on how to glue the arched corner on the arch, you can safely begin to finish and create an atmosphere of greatness and nobility, which carry arches since ancient times.
